QTR-Quadtone RIP

Nick,

 

After a lot of struggle I finally fixed it. However, one caveat, it may have
been two problems interconnected.

 

Bottom line. I uninstalled all of the printers by deleting the registry
entries and reinstalled the printers. Voila, up and running. When I
discovered I was not allowed permission to remove a printer driver in the
control panel even though I had ADMIN perm. I got suspicious.

 

Seems the RPC call was to the printer drivers, not sure of that but this
finally did the fix.

 

Thanks for all your help.

 

From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of nmenghardt
Sent: Saturday, March 10, 2012 7:17 AM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: that fixed the error 1722!!!!

 

  

Hey Dick,

Great news! Glad it worked.

If it hadn't worked, I would have suggested installing another USB card in
your machine (possible if you're using a tower, not so much if you're on a
laptop). Sounded like you had been crashing your USB BUS with too much
plugged in to one port. If your printer is connected via USB, and if your
BUS is crashed, this can affect your print spooler.

But, no need for surgery.

Cheers!
Nick

--- In QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com> ,
"richard Sullivan" <richsul@...> wrote:
>
> Nick,
> 
> 
> 
> Restarting the print spooler did it.
> 
> 
> 
> Thanks a million!
> 
> 
> 
> --Dick Sullivan
> 
> 
> 
> From: QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com>
[mailto:QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com> ]
On
> Behalf Of nmenghardt
> Sent: Friday, March 09, 2012 8:12 AM
> To: QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com> 
> Subject: [QuadtoneRIP] Re: I am getting error code 1722
> 
> 
> 
> 
> 
> Hi Dick,
> 
> Windows still runs printing off a service - you can start, stop, and
restart
> the services from the services.msc application. I'm doing this all on my
> windows xp VM:
> 
> Go to Start -> Run -> type in services.msc and hit enter
> 
> You can find the print spooler in here and control it by clicking on it
and
> selecting stop (if it's started) and restart from the left hand side of
the
> window.
> 
> If this doesn't work, the print spooler might need to be re-installed:
> 
>
http://social.technet.microsoft.com/Forums/en/winserverfiles/thread/6de177db
> -df34-4801-be93-1a8e4231f183
> 
> You might try booting off your windows install cd and see if you need to
run
> a repair on the operating system, as well (this is much easier than
> completely reinstalling the OS).
> 
> Good luck and I hope this helps!
> 
> Nick
> 
> --- In QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com>
<mailto:QuadtoneRIP%40yahoogroups.com> ,
> "richard Sullivan" <richsul@> wrote:
> >
> > Thanks. I checked out the link but it does not seem to apply to me as I
am
> > not using a print server, at least I don't think so. I cannot get any
> > configuration stuff like profiles, printers etc. None of the drop downs
> > work. I get the error on boot up not when calling a printer. I also
turned
> > off Norton's firewall.
> > 
> > 
> > 
> > --Dick Sullivan
> > 
> > 
> > 
> > From: QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com>
<mailto:QuadtoneRIP%40yahoogroups.com>
> [mailto:QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com>
<mailto:QuadtoneRIP%40yahoogroups.com> ]
> On
> > Behalf Of nmenghardt
> > Sent: Thursday, March 08, 2012 7:13 AM
> > To: QuadtoneRIP@yahoogroups.com <mailto:QuadtoneRIP%40yahoogroups.com>
<mailto:QuadtoneRIP%40yahoogroups.com> 
> > Subject: [QuadtoneRIP] Re: I am getting error code 1722
> > 
> > 
> > 
> > 
> > 
> > I'm generally Mac oriented but I've done some Windows server work in the
> > past.
> > 
> > Have you tried restarting the spooler service? Also, you might try
> > reinstalling the printer that is having this issue.
> > 
> > Reboot, Check spooler service
> > 
> > or
> > 
> > Uninstall printer, reboot, reinstall printer, reboot, try printing.
> > 
> > You can check the services by following this post:
> > 
> >
>
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/8b959
> > 71d-d98f-4986-95b8-b2bbe46c5452/
> > 
> > I don't know if you've tried these steps as you weren't specific as to
> what
> > steps you've taken to resolve the issue.
> > 
> > Hope this helps!
> > 
> > --- In QuadtoneRIP@yahoogroups.com
<mailto:QuadtoneRIP%40yahoogroups.com>
<mailto:QuadtoneRIP%40yahoogroups.com>
> <mailto:QuadtoneRIP%40yahoogroups.com> ,
> > "richsul" <richsul@> wrote:
> > >
> > > Seems to be a remote procedure call RPS service unavailable. I have
done
> > quite a few things recommend to fix it but it still persists. When I go
to
> > administrative services it says it is active and not disabled.
> > > 
> > > I've uninstalled and re installed current and previous versions and
> > rebooted a number of times.
> > > 
> > > Any ideas?
> > > 
> > > Thanks Dick Sullivan
> > >
> > 
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>





[Non-text portions of this message have been removed]