QTR-Quadtone RIP

Thanks John.  I haven't tried using the rear feeder but have tried to give 
the paper a little push but it will still jams.  When it jams that is,  half 
the time the paper will just travel all the way though the printer.  It 
doesn't seem to matter what paper I use.  Lately it's been Moab Kayenta 
which isn't very thick.

Tom
----- Original Message ----- 
From: "John Tunley" <john.tunley@...>
To: <QuadtoneRIP@yahoogroups.com>
Sent: Monday, November 07, 2005 2:12 AM
Subject: RE: [QuadtoneRIP] 2200 Printing Problem


> Tom,
>
> I have often experienced the same problem with an Epson 2100 when using 
> HPR
> and QTR. Epson papers are less of a problem and, as you say, with the 
> Epson
> driver there is no problem.
>
> It seems to be caused by a slight slippage in the paper feed, possibly due
> to some coating transfer from paper to drive rollers. It usually occurs
> after a few prints have been successfully completed. Feeding from the rear
> feed slot is always recommended for thicker papers. I have generally
> overcome the problem when feeding the lighter HPR paper (188g/m^2) from 
> the
> top by encouraging the paper feed by hand with a gentle initial push.
>
> Regards,   John T