QTR-Quadtone RIP

I did just try that setting and it is not bad but quit rough compared to QTR. It might be OK for test prints and then do the "walk around" with QTR for anything important.  

    On Tuesday, June 13, 2017 10:10 PM, "MYoung4828@... [QuadtoneRIP]" <QuadtoneRIP@yahoogroups.com> wrote:
 

     have you ever tried the epson driver, plain paper, grayscale settings...very nice BW and totally neutral. (1430) 

-----Original Message-----
From: Jacques Caron jacques.caron@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com>
To: mark sloane marksuesloane@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com>
Sent: Tue, Jun 13, 2017 7:04 pm
Subject: Re: [QuadtoneRIP] Artisan 1430 w/QTR banding

    Ditto hère

Envoyé de mon iTruc

> Le 13 juin 2017 à 21:25, mark sloane marksuesloane@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> a écrit :
> 
> The 1430 requires you to have at least a one inch margin on the leading edge going into the printer. 
> 
> 
> I'm told that the 1430, which I use and had the same problem, has firmware that prevents QTR from managing this issue. My banding issues were eliminated as soon as I started using the one inch margin.
> 
> 
> I'm not a techie so if I got something wrong, I hope somebody will correct me.
> 
> 
> 
> 
> Mark Sloane 
> (775) 276 - 5315
> 
> 
> 
> 
> 
> 
> 
> 
> 
> --------------------------------------------
> On Tue, 6/13/17, Bernard Wolf brooksveriwide@... [QuadtoneRIP] <QuadtoneRIP@yahoogroups.com> wrote:
> 
> 
> Subject: [QuadtoneRIP] Artisan 1430 w/QTR banding
> To: "QTR-Forum" <quadtonerip@yahoogroups.com>
> Date: Tuesday, June 13, 2017, 6:08 PM
> 
> 
> 
> 
> 
>