QTR-Quadtone RIP

Hi Tom,


> Not having used IJC/OPM or UT inks (although I've used the UT7 with QTR on
> my 2200), I don't have direct experience applicable to your problem.
> However, since the ink positions can be somewhat arbitrary is it possible
> that IJC/OPM expects inks in different position from that expected by the
> QTR curve you tried?

That is what I thought--but if you look at the ink config page here:

http://www.inksupply.com/ut2200bh.cfm

It appears that IJC/OPM and QTR profiles both should be set for that ink configuration. I 
would be an easy test just to swap the 50% and blue toner cart, but I have CFS and tubes 
get out of place.

Hmmm... I think I just discovered something here:

http://www.inksupply.com/ut7_2200.cfm

I bet the mix up has to do with whether the inks are UT or UT7... I'll check when I get 
home.

Thanks,

Jon

> 
> Just a thought...
> 
> Tom Moore
> 
> > -----Original Message-----
> > From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
> > Behalf Of Jon Witsell
> 
> 
> ...
>