QTR-Quadtone RIP

Hi
I think you need to print quite a bit more than that to clear a line
on a 7500. Why don't you print another 4-5 ft before testing.
Also,just print the calibration pattern and look at it. That should
show you what is going on and if the inks are set up correctly.

Regards
Duane


--- In QuadtoneRIP@yahoogroups.com, Jim Hockings <J@o...> wrote:
>
> Wells and others,
> 
> I have had a chance to use the new cart you sent me to replace the one
> filled incorrectly. I have printed about 200 square inches of photo
images
> to clean the lines and have cleaned the heads three times to use up more
> ink. I think I am getting the new ink on my prints.
> 
> I still have a problem.  I am using K-6 and the Quadtone RIP on a
7500 with
> HPR paper with all the settings on standard: HPR curve, 100% and
Gamma 0 and
> ink 0. I have studied the RIP instructions thoroughly as well.
> 
> When I print a step wedge, all the tones from 40 to 60 (3 blocks in
all) are
> exactly the same---no separation at all. The rest of the tones are
perfectly
> separated.
> 
> Do you think one of the other inks is still wrong?  I have checked
the cart
> placement three times, once even with you walking me through it on the
> telephone. They are properly placed.
> 
> What is going on here? A glitch in the RIP?
> 
> Thanks.
> 
> Jim Hockings
> 
> On 1/24/06 2:24 PM, "Wells Smith" <wells@i...> wrote:
> 
> > Dear Jim,
> > 
> > The K6 have arrived and will be taken into inventory. We hope to
see these
> > ship in the next several days.
> > 
> > Thanks for your patience.
> > 
> > Best,
> > 
> > wells
> > 
> > Wells Smith
> > InkjetMall
> > 1-802-439-3127 
> > 
> >
>