QTR-Quadtone RIP

John,

Thanks you for your swift reply..

The cart in the magenta position, (the little magenta ink drop icon that is
the third from left on the 7500) is NEU-109-060-LM, for sure.

Wells sent me a replacement cart for the magenta cart that is in the yellow
position (sixth from the left). That one is NEU-109-060-M.

The carts I have now are, aside from the two mentioned above, K=neu-109-k,
C=neu-109-320-c, LC=neu-109-160-lc,
LM=neu-109-025-y.  The references are all to the ink drop icons and read
right to left.

Thanks Jon.

I have work to do on this machine and am eager to get on with it.

Jim Hockings

 On 1/29/06 8:50 PM, "Jon Cone" <piezobw@...> wrote:

> Jim,
> 
> I think the glitch is in the cartridge still. Take a look at your magenta
> position cart and see
> if the lable has the following sub-line: NEU-109-100 or NEU-109-060.  The
> magenta 
> position should have a sub-line of NEU-109-060 which represents 6% dilution.
> If it reads 
> NEU-109-100 then it is a second 10% dilution in the same printer.
> 
> Our carts are distributed from a warehouse in New Hampshire. I sent someone
> out to look 
> at the inventory there and there are some mistakes in that particular position
> of K6 ink.
> 
> We are contacting everyone on Monday. But please call into InkjetMall in the
> morning if 
> you like. We will remedy as best we can as soon as possible.
> 
> regards,
> 
> Jon Cone
> InkjetMall
> 
> --- In QuadtoneRIP@yahoogroups.com, Jim Hockings <J@o...> wrote:
>> >
>> > Wells and others,
>> > 
>> > I have had a chance to use the new cart you sent me to replace the one
>> > filled incorrectly. I have printed about 200 square inches of photo images
>> > to clean the lines and have cleaned the heads three times to use up more
>> > ink. I think I am getting the new ink on my prints.
>> > 
>> > I still have a problem.  I am using K-6 and the Quadtone RIP on a 7500 with
>> > HPR paper with all the settings on standard: HPR curve, 100% and Gamma 0 >>
and
>> > ink 0. I have studied the RIP instructions thoroughly as well.
>> > 
>> > When I print a step wedge, all the tones from 40 to 60 (3 blocks in all) >>
are
>> > exactly the same---no separation at all. The rest of the tones are
>> perfectly
>> > separated.
>> > 
>> > Do you think one of the other inks is still wrong?  I have checked the cart
>> > placement three times, once even with you walking me through it on the
>> > telephone. They are properly placed.
>> > 
>> > What is going on here? A glitch in the RIP?
>> > 
>> > Thanks.
>> > 
>> > Jim Hockings
>> > 
>> > On 1/24/06 2:24 PM, "Wells Smith" <wells@i...> wrote:
>> > 
>>> > > Dear Jim,
>>> > > 
>>> > > The K6 have arrived and will be taken into inventory. We hope to see >>>
these
>>> > > ship in the next several days.
>>> > > 
>>> > > Thanks for your patience.
>>> > > 
>>> > > Best,
>>> > > 
>>> > > wells
>>> > > 
>>> > > Wells Smith
>>> > > InkjetMall
>>> > > 1-802-439-3127
>>> > > 
>>> > >
>> >
> 
> 
> 
> 
> 
> 
> YAHOO! GROUPS LINKS
> 
> *  Visit your group "QuadtoneRIP <http://groups.yahoo.com/group/QuadtoneRIP> "
> on the web.
> *  
> *  To unsubscribe from this group, send an email to:
> *  QuadtoneRIP-unsubscribe@yahoogroups.com
> <mailto:QuadtoneRIP-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> *  
> *  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/> .
> 
> 
>