QTR-Quadtone RIP

Yes, Ed's observations are right.

Due the specific drop sizes of the 2200 at 2880dpi 
the 40 to 45% ink limit is the normal range.

Roy

--- In QuadtoneRIP@yahoogroups.com, "edrudolpho" <erudolph@p...> wrote:
>
> Chuck, in my limited experience with QTR and the 2200, the ink limit is very dependent 
on 
> the dpi setting you use in the driver.  If you are using 2880 dpi, 40 could well be in the 
> ballpark.  I used an inklimit of 45%, with UT-7 inks, at 2880 dpi.
> 
> Ed
> 
> --- In QuadtoneRIP@yahoogroups.com, "Chuck Kimmerle" <chuckkimmerle@g...> 
wrote:
> >
> > 2200 with UC inks: Just started calibrating and have had to lower the
> > setting on the ink calibration to 40, and may have to go even lower
> > once the paper is dry and I can put the densitometer back to the step
> > wedge. Does having to go this low mean that there is an inherent
> > problem with the printer, or is it just personality?
> > 
> > Chuck
> >
>