QTR-Quadtone RIP

Joost,
 
Thanks for the update on the curves......  If you don't mind it would be
great if you could post them.
 
I am really have a tough time getting the inks to work.  After I loaded them
all I get is random nozzle checks.    Its purely random.  I run the head
clean then print and its totally random.
 
I have used up all the ink running tests and never go to the curves.   I am
trying to decide if I order more ink or just pass on the UT3D....
 
Any comments or suggestions would be helpful.
 
Paul

-----Original Message-----
From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of Joost Horsten
Sent: Monday, August 25, 2008 6:27 AM
To: QuadtoneRIP@yahoogroups.com
Subject: [QuadtoneRIP] Re: MIS UT3D Ink in Epson 2200



--- In QuadtoneRIP@ <mailto:QuadtoneRIP%40yahoogroups.com> yahoogroups.com,
"Tom Moore" <rtmlists8888@...> 
wrote:
>
> Paul
> 
> There's a UT3D curve for the 2200 in the files section of the 
QuadtoneRIP
> yahoo group pages here:
> 
> http://tinyurl. <http://tinyurl.com/6ectfa> com/6ectfa
> 
> It uses the UT7 printing model.
> 

I'm not sure if Tom is referring to my curves (QTR-2100-UT3D.zip, the 
2200 is the US type number for the 2100). These are a bit older 
curves using 1440 dpi and some split-tone curves. Later I made some 
2880 dpi curves for some (marginally) improved smoothness. Also I 
left out the split-tone curves as QTR has now a much more advanced 
split-tone control itself. Let me know if you are interested in these 
than I will post them as well.

Joost




 



[Non-text portions of this message have been removed]