QTR-Quadtone RIP

Paul,
 
Your recommendation solved the problem.   Thank you very, very much.....Mark


Mark Sloane 
925 820 4112 Home
925 997 0281 Cell

--- On Fri, 11/28/08, Paul Roark <paul.roark@...> wrote:

From: Paul Roark <paul.roark@...>
Subject: RE: [QuadtoneRIP] Re: Installing Problems for Epson 2880
To: QuadtoneRIP@yahoogroups.com
Date: Friday, November 28, 2008, 11:23 AM

The 1400, as well as the 1800 and probably other 1.5 pl printers, seem to be
sensitive to paper feed issues.  They are best when both rollers are
engaged.  At a practical matter, you need wide top and bottom margins to
avoid banding.

 

Paul

www.PaulRoark.com <http://www.paulroark.com/>  

 

 

  _____  

From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
Behalf Of mark sloane
Sent: Friday, November 28, 2008 10:25 AM
To: QuadtoneRIP@yahoogroups.com
Subject: Re: [QuadtoneRIP] Re: Installing Problems for Epson 2880

 

I've got a curious issue that maybe you folks can help me with.
 
I'm using a CIS I bought from Joe on an Epson 1400.  I've been working
through a number of issues and have them all solved except for one:  I get
some type of banding the first 1/2 inch of the print.  It's odd because it
goes away after the first half of an inch and then starts all over again for
the next print.  If it was continuous it would almost make more sense to me
but every print has the first half inch of banding.  The banding looks to me
as no ink vs. the wrong ink.
 
Also, I have cycled through nozzel checks, head cleanings and print head
alignments before each print, after each print all to no avail.
 
Anybody have any experience with this?  I'm lost and don't know where
to go
next.

Mark Sloane 
925 820 4112 Home
925 997 0281 Cell

[Non-text portions of this message have been removed]

 



[Non-text portions of this message have been removed]


------------------------------------

Yahoo! Groups Links






      

[Non-text portions of this message have been removed]