QTR-Quadtone RIP

I had the problem in september and I picked the R2400 driver As Roy 
recommend it. It works fine but I have a problem of microbanding on the 
top and bottom (about one inch) of my prints with the UCMk3 inks. I hope 
that the new driver set for the R2880 could solve that .
Stephane

Roy Harrington a \ufffdcrit :
>
> The gibberish comes from selecting a printer model driver that is
> incompatible with the
> printer you are using. I assume when you said "2880 printer name" you have
> a new Epson R2880 printer. If so, this printer is not yet supported
> so you can't
> have picked a matching printer driver. However as it turns out the R2880
> printer is very compatible with the R2400 printer that it replaces. So you
> might try use printer model QuadR2400. The profiles ought to be a
> bit different
> since there are new inks but with the blending you make find decent 
> results.
>
> Roy
>
> On Fri, Nov 28, 2008 at 12:53 AM, rabanito <rabsanito@... 
> <mailto:rabsanito%40yahoo.com>> wrote:
> > Hallo Peter
> >
> > thank you for the hints. I got something else, perhaps this could help
> > to understand what's happening.
> >
> > First I uninstalled and installed again. I even tried a former version
> > but the result is the same.
> >
> > NOW:
> >
> > - I used 21step.tif as you proposed.
> > - I fed enough sheets (A4)just to see what happens.
> > - The first sheet got printed a horizontal line (or wedge)about 1mm
> > thickness
> > - the next 3 or 4 sheets got nothing
> > - The 5th sheet got gibberish like ..@A@L@@DA@D@AADD@@DD@@@....etc
> >
> > Looks like QTR and my printer are not speaking the same language, but
> > I am a novice in these matters... I presume there is something to be
> > done that I missed...
> >
> > Thanks again
> >
> > Jorge
> >
> >
> >
> >
> > --- In QuadtoneRIP@yahoogroups.com 
> <mailto:QuadtoneRIP%40yahoogroups.com>, "grayscale2008" <pm2003@...> 
> wrote:
> >>
> >> Hi Jorge!
> >>
> >> Mmmmh...
> >>
> >> I am using the same version but no problem with that.
> >>
> >> Perhaps you uninstall qtr completly and you install it again?
> >>
> >> Perhaps that might help?
> >>
> >> Can you print the 21step.tif that came with qtr?
> >>
> >> CU
> >>
> >> Peter
> >>
> >> --- In QuadtoneRIP@yahoogroups.com 
> <mailto:QuadtoneRIP%40yahoogroups.com>, "rabanito" <rabsanito@> wrote:
> >> >
> >> > Hallo Peter
> >> >
> >> > 1. Yes, 8bit uncompressed
> >> >
> >> > 2. Actually I didn't get any chance to name the printer. It appeared
> >> > already in the drop-down "printer name", where name and printer model
> >> > are. While installing (QTR_Setup_2.6.1.EXE) there were no other
> >> > instructions other than "close all other programs", and this I 
> did :-)
> >> >
> >> > The printer does get some command, but I understand too little of 
> what
> >> > is happening. The sheet of paper comes out without being printed at
> >> > all and the task remains in the queue with the document as "being
> >> > printed". I have to delete it manually.
> >> >
> >> > Printing for example with Photoshop, without QTR happens normally. I
> >> > mean the printer is OK.
> >> >
> >> > (I got the version 2.6.1.0).
> >> >
> >> > Thanks for you attention :-)
> >> >
> >> > Jorge
> >> >
> >> > --- In QuadtoneRIP@yahoogroups.com 
> <mailto:QuadtoneRIP%40yahoogroups.com>, "grayscale2008" <pm2003@> wrote:
> >> > >
> >> > > 1.) Your tifs 8 bit tifs?
> >> > >
> >> > > 2.) How did you name the printer in QTR gui?
> >> > >
> >> > > CU
> >> > >
> >> > > Peter
> >> > >
> >> >
> >> > >
> >> >
> >>
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>