QTR-Quadtone RIP

Jorge

It sounds like you are not using the correct Printer Model. My version of
QTRgui does not have a model for the R2880. If Peter had not said that the
printer is working for him (presumably with QTR) I would have guessed that
QTR doesn't support this model yet.

Since Peter says that it is working for him, make sure you are using the
same printer model he is. The Printer Model tells QTR what low level command
set to use for the printer.

Tom Moore

> -----Original Message-----
> From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On
> Behalf Of rabanito

...

> thank you for the hints. I got something else, perhaps this could help
> to understand what's happening.
> 
> First I uninstalled and installed again. I even tried a former version
> but the result is the same.
> 
> NOW:
> 
> - I used 21step.tif as you proposed.
> - I fed enough sheets (A4)just to see what happens.
> - The first sheet got printed a horizontal line (or wedge)about 1mm
> thickness
> - the next 3 or 4 sheets got nothing
> - The 5th sheet got gibberish like ..@A@L@@DA@D@AADD@@DD@@@....etc
> 
> Looks like QTR and my printer are not speaking the same language, but
> I am a novice in these matters... I presume there is something to be
> done that I missed...
> 
> Thanks again
> 
> Jorge