QTR-Quadtone RIP

I can confirm Makes 1900 QTR behavior here. Manual rear feed, when it
does work, situates the paper incorrectly before starting to print
from QTR, pre or post loading. The Epson driver works fine.
Tyler

--- In QuadtoneRIP@yahoogroups.com, "Michael King" <drmrking@...> wrote:
>
> Encouraged by your experiences on the 1800 I went back and tried the
1900
> single sheet feed again.
> Neither 2.6.1.0 or 2.6.2.0 work either pre or post loading the
paper. They
> print into fresh air for the first inch or so.
> 
> However one of Roy's test versions he had sent me does work with pre
or post
> loading.
> Must have somehow missed that the other evening during testing;
probably the
> grape juice effect.
> 
> Note that I do find that the single sheet paper feed is very very
sensitive.
> You have to load the paper all the way into the hard stop and then the
> printer should suck it in a bit further BEFORE it does the major
paper feed.
> If it doesn't suck it in a bit first, then you will probably get a
misfeed
> on print and have to cancel the job in the printer queue and hold the
> dustbin button down on the printer for ever before it resets.
> 
> Happy printing.
> 
> Mike
> 2008/12/24 Hassan El-Zayyat <halacam@...>
> 
> >   Yes, QTR (2.6.1) prints correctly, with the expected margins as
I set
> > them. So for that matter does the Epson driver.
> > Hassan
> >
> > ----- Original Message -----
> > From: Michael King
> > To: QuadtoneRIP@yahoogroups.com <QuadtoneRIP%40yahoogroups.com>
> >  Sent: Wednesday, December 24, 2008 3:37 PM
> > Subject: Re: SPL [QuadtoneRIP] R1800 use
> >
> > Hassan,
> >
> > >>On my 1800, the single-sheet feeder has never worked unassisted.
I need
> > to
> > feed the paper in until it engages the rollers, then hold it with
a slight
> > downward pressure until the printer pulls it in. It has been this
way since
> > I bought
> >
> > Can you confirm that QTR prints correctly on the paper once you
get the
> > single sheet to feed?
> > That's using the QTR "Manual Roll (Rear)" option on PC.
> >
> > Txs,
> >
> > Mike
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>