QTR-Quadtone RIP

Seanh,

ok so just to confirm - you are printing the 21 x 4 random target from the
QTR eye-one folder - correct?
Without changing its size or anything else - correct?

then you load the 24 x 4 random txt file into measure tool and select "mode:
strip without gaps".
Then starting at the top left of the target where it says "Beg" you scan the
target smoothly from left to right for one line and the come back to the
beginning of the next line and scan from left to right again etc.

Note you must start the scan on the white paper before the target line and
end on the white paper after the target line.

Mike



On 26 August 2011 21:13, spsguru <spsguru@...> wrote:

> **
>
>
> Mike
>
> Thank you for the tip.
>
> I did install measure. After multiple tries I keep getting the out of order
> error using the 21x4 patch
>
> When I look at the sampled strip just prior to export it looks like the
> printed strip so I think I am measuring then right patch
>
> But like I said after about 6 tries I keep getting the error
>
> Any ideas how to get past this?
>
> Thank you
> Sean
>
> --- In QuadtoneRIP@yahoogroups.com, Michael King <drmrking@...> wrote:
> >
> > I don't think iprofiler supports spot measurements. You need the old
> xrite
> > "measuretool". It comes as part of the discontinued profilemaker5
> download,
> > and the features you need work without a dongle (i.e. free). You can get
> it
> > here ...
> >
> http://www.xrite.com/product_overview.aspx?ID=757&Action=support&SoftwareID=931
> >
> > I think you can choose what to install - so just install measuretool.
> >
> > Good luck.
> >
> > Mike
> >
> > On 26 August 2011 01:56, spsguru <spsguru@...> wrote:
> >
> > > **
> > >
> > >
> > > Hi all
> > >
> > > I am new to creating icc profiles
> > >
> > > I just purchased i1 Pro Basic kit
> > >
> > > The software it comes with is i1 Profiler that automatically creates
> > > targets
> > >
> > > I cannot find a way to just get to the measuring device and take the
> spot
> > > measurements I think I need to for creation of ICC - or to load in the
> > > target the way the Roy's icc instructions dictate for the old software.
> > >
> > > Any help on creating icc profiles with i1 Pro basic kit would be
> > > appreciated
> > >
> > > thank you
> > > Sean
> > >
> > >
> > >
> >
> >
> > [Non-text portions of this message have been removed]
> >
>
>  
>


[Non-text portions of this message have been removed]