QTR-Quadtone RIP

err not sure where that "h" in Sean came from :)

On 26 August 2011 21:28, Michael King <drmrking@...> wrote:

> Seanh,
>
> ok so just to confirm - you are printing the 21 x 4 random target from the
> QTR eye-one folder - correct?
> Without changing its size or anything else - correct?
>
> then you load the 24 x 4 random txt file into measure tool and select
> "mode: strip without gaps".
> Then starting at the top left of the target where it says "Beg" you scan
> the target smoothly from left to right for one line and the come back to the
> beginning of the next line and scan from left to right again etc.
>
> Note you must start the scan on the white paper before the target line and
> end on the white paper after the target line.
>
> Mike
>
>
>
> On 26 August 2011 21:13, spsguru <spsguru@...> wrote:
>
>> **
>>
>>
>> Mike
>>
>> Thank you for the tip.
>>
>> I did install measure. After multiple tries I keep getting the out of
>> order error using the 21x4 patch
>>
>> When I look at the sampled strip just prior to export it looks like the
>> printed strip so I think I am measuring then right patch
>>
>> But like I said after about 6 tries I keep getting the error
>>
>> Any ideas how to get past this?
>>
>> Thank you
>> Sean
>>
>> --- In QuadtoneRIP@yahoogroups.com, Michael King <drmrking@...> wrote:
>> >
>> > I don't think iprofiler supports spot measurements. You need the old
>> xrite
>> > "measuretool". It comes as part of the discontinued profilemaker5
>> download,
>> > and the features you need work without a dongle (i.e. free). You can get
>> it
>> > here ...
>> >
>> http://www.xrite.com/product_overview.aspx?ID=757&Action=support&SoftwareID=931
>> >
>> > I think you can choose what to install - so just install measuretool.
>> >
>> > Good luck.
>> >
>> > Mike
>> >
>> > On 26 August 2011 01:56, spsguru <spsguru@...> wrote:
>> >
>> > > **
>> > >
>> > >
>> > > Hi all
>> > >
>> > > I am new to creating icc profiles
>> > >
>> > > I just purchased i1 Pro Basic kit
>> > >
>> > > The software it comes with is i1 Profiler that automatically creates
>> > > targets
>> > >
>> > > I cannot find a way to just get to the measuring device and take the
>> spot
>> > > measurements I think I need to for creation of ICC - or to load in the
>> > > target the way the Roy's icc instructions dictate for the old
>> software.
>> > >
>> > > Any help on creating icc profiles with i1 Pro basic kit would be
>> > > appreciated
>> > >
>> > > thank you
>> > > Sean
>> > >
>> > >
>> > >
>> >
>> >
>> > [Non-text portions of this message have been removed]
>> >
>>
>>  
>>
>
>


[Non-text portions of this message have been removed]