QTR-Quadtone RIP

Mike - this is just the kind of insight I was hoping for...can never seem to find this stuff in a manual.

No - I was scanning using Patches not strip

So - Strip without Gaps - start on white end on white - for each line - correct?

thank you
Sean

--- In QuadtoneRIP@yahoogroups.com, Michael King <drmrking@...> wrote:
>
> Seanh,
> 
> ok so just to confirm - you are printing the 21 x 4 random target from the
> QTR eye-one folder - correct?
> Without changing its size or anything else - correct?
> 
> then you load the 24 x 4 random txt file into measure tool and select "mode:
> strip without gaps".
> Then starting at the top left of the target where it says "Beg" you scan the
> target smoothly from left to right for one line and the come back to the
> beginning of the next line and scan from left to right again etc.
> 
> Note you must start the scan on the white paper before the target line and
> end on the white paper after the target line.
> 
> Mike
> 
> 
> 
> On 26 August 2011 21:13, spsguru <spsguru@...> wrote:
> 
> > **
> >
> >
> > Mike
> >
> > Thank you for the tip.
> >
> > I did install measure. After multiple tries I keep getting the out of order
> > error using the 21x4 patch
> >
> > When I look at the sampled strip just prior to export it looks like the
> > printed strip so I think I am measuring then right patch
> >
> > But like I said after about 6 tries I keep getting the error
> >
> > Any ideas how to get past this?
> >
> > Thank you
> > Sean
> >
> > --- In QuadtoneRIP@yahoogroups.com, Michael King <drmrking@> wrote:
> > >
> > > I don't think iprofiler supports spot measurements. You need the old
> > xrite
> > > "measuretool". It comes as part of the discontinued profilemaker5
> > download,
> > > and the features you need work without a dongle (i.e. free). You can get
> > it
> > > here ...
> > >
> > http://www.xrite.com/product_overview.aspx?ID=757&Action=support&SoftwareID=931
> > >
> > > I think you can choose what to install - so just install measuretool.
> > >
> > > Good luck.
> > >
> > > Mike
> > >
> > > On 26 August 2011 01:56, spsguru <spsguru@> wrote:
> > >
> > > > **
> > > >
> > > >
> > > > Hi all
> > > >
> > > > I am new to creating icc profiles
> > > >
> > > > I just purchased i1 Pro Basic kit
> > > >
> > > > The software it comes with is i1 Profiler that automatically creates
> > > > targets
> > > >
> > > > I cannot find a way to just get to the measuring device and take the
> > spot
> > > > measurements I think I need to for creation of ICC - or to load in the
> > > > target the way the Roy's icc instructions dictate for the old software.
> > > >
> > > > Any help on creating icc profiles with i1 Pro basic kit would be
> > > > appreciated
> > > >
> > > > thank you
> > > > Sean
> > > >
> > > >
> > > >
> > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>