On 6/19/07, Johan du Preez <dupreez.johan@...> wrote:
> Hi all,
>
> Ok, I have been tinkering all day and eventually solved my problem as
> follows:
>
> 1. restart the network - my intranet is complicated so I just followed
> the BRS routine
> 2. reset and reconfigured the Airport base station connected to my
> Epson2200
> 3. deleted all the printers listed in the Printer Setup Utility
> 4. reinstalled all the printers, including the Quad2200
>
> And I am in business; Roy, thanks for your patience, It is well
> appreciated! I now look forward to many happy hours of printing - I will
> have to do the baby photos first to get my parents off my back!
>
> Cheers until later
> Johan
>
> On 6/19/07, Johan du Preez <dupreez.johan@...> wrote:
> >
> > Thanks Roy,
> >
> > One thing; for Print Setup Utility / Printer List / Quad2200-K7, the
> > ColorSync utility is grayed out, whereas it works for the Epson Stylus Photo
> > 2200 - Is this relevant?
> >
> >
> > Now, the info you asked for:
> >
> > Last login: Tue Jun 19 08:39:38 on ttyp1
> > /Volumes/QTRIP2.5/DiagnosticScript.command; exit
> > Welcome to Darwin!
> > du-preez-johans-computer:~ dupreezjohan$
> > /Volumes/QTRIP2.5/DiagnosticScript.command; exit
> >
> > ********************************************************************
> >
> > **** QuadToneRIP 2.5.1 Diagnostic Script --- Save Output for Analysis ****
> >
> > ********************************************************************
> >
> > Tue Jun 19 08:43:32 HKT 2007
> >
> > **** System Info ****
> > Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:
> > xnu-792.18.15~1/RELEASE_I386
> >
> > **** Printer Info ****
> > scheduler is running
> > system default destination: Quad2200-K7
> > device for EPSON_Stylus_Photo_2200: ///dev/null
> > device for Quad2200-K7: lpd://192.168.1.6
> > device for Stylus_Photo_2200: ///dev/null
> > EPSON_Stylus_Photo_2200 accepting requests since Jan 01 00:00
> > Quad2200-K7 accepting requests since Jan 01 00:00
> > Stylus_Photo_2200 accepting requests since Jan 01 00:00
> > printer EPSON_Stylus_Photo_2200 is idle. enabled since Jan 01 00:00
> > printer Quad2200-K7 is idle. enabled since Jan 01 00:00
> > recoverable: Network host ' 192.168.1.6' is busy, down, or
> > unreachable; will retry in 30 seconds...
> > printer Stylus_Photo_2200 is idle. enabled since Jan 01 00:00
> > Quad2200-K7-14 dupreezjohan 1439744 Tue Jun 19 08:42:51 2007
> >
> > **** QTR Programs ****
> > /usr/local/bin
> > Quad.pm* qcurve* qgamma* qmerge*
> > quadcurves*
> > qacv* qdensity* qgraph* qpart*
> > quadprofile*
> > qacvraw* qdiff* qlimit* qplot*
> > qadd* qdotgain* qline* qspline*
> >
> > /usr/libexec/cups/filter
> > quadtoneprint* quadtoprinter*
> >
> > **** Plugin Programs ****
> > total 0
> > drwxr-xr-x 3 dupreezj dupreezj 102 Feb 24 07:26 QuadTone.plugin
> >
> > **** QTR Printer Descriptions ****
> > /usr/share/cups/model/C
> > escp2-10000-quad.ppd.gz escp2-860-quad.ppd.gz
> > escp2-1160-quad.ppd.gz escp2-870-quad.ppd.gz
> > escp2-1200-quad.ppd.gz escp2-890-quad.ppd.gz
> > escp2-1270-quad.ppd.gz escp2-9000-quad.ppd.gz
> > escp2-1280-quad.ppd.gz escp2-9500-quad.ppd.gz
> > escp2-1290-quad.ppd.gz escp2-9600-quad.ppd.gz
> > escp2-2000-quad.ppd.gz escp2-980-quad.ppd.gz
> > escp2-2100-quad.ppd.gz escp2-9800-quad.ppd.gz
> > escp2-2200-quad.ppd.gz escp2-EX-quad.ppd.gz
> > escp2-3000-quad.ppd.gz escp2-R1800-quad.ppd.gz
> > escp2-3800-quad.ppd.gz escp2-R200-quad.ppd.gz
> > escp2-4000-quad.ppd.gz escp2-R220-quad.ppd.gz
> > escp2-4800-quad.ppd.gz escp2-R2400-quad.ppd.gz
> > escp2-7000-quad.ppd.gz escp2-R300-quad.ppd.gz
> > escp2-7500-quad.ppd.gz escp2-R320-quad.ppd.gz
> > escp2-7600-quad.ppd.gz escp2-R340-quad.ppd.gz
> > escp2-7800-quad.ppd.gz escp2-R800-quad.ppd.gz
> >
> > **** QTR Profiles ****
> > /usr/share/cups/quadtone/Quad2200:
> > K7-1440-HanPhotoRag.quad K7-2880-HanWilliamTurner.quad
> > K7-2880-BradfordBCoolMatte.quad K7-2880-IPCanvas.quad
> > K7-2880-BradfordRBrightW.quad K7-2880-IPPictRagCool.quad
> > K7-2880-BradfordRBrilliantWD.quad K7-2880-IPPictRagWarm.quad
> > K7-2880-BradfordRNaturalW.quad K7-2880-IPPrintPlusM.quad
> > K7-2880-EpEnhancedMatte.quad K7-2880-IPVelvet.quad
> > K7-2880-EpMatteHW.quad K7-2880-InnovaColdPressArt.quad
> > K7-2880-HanAlbrechtDurer.quad K7-2880-InnovaPhotoFibaP.quad
> > K7-2880-HanArtProof.quad K7-2880-InnovaPhotoSmoothC.quad
> > K7-2880-HanEtching.quad K7-2880-InnovaSoftTexArt.quad
> > K7-2880-HanPhotoRag.quad K7-2880-LgnSomersetPEnhVel.quad
> > K7-2880-HanPhotoRagBrtW.quad K7-2880-MoabEntradaFABW.quad
> > K7-2880-HanPhotoRagSatin.quad K7-2880-MoabEntradaFANat.quad
> > K7-2880-HanWhiteVelvet.quad K7-2880-MoabKayentaPhotoM.quad
> >
> > /usr/share/cups/quadtone/Quad2200-K7:
> > K7-1440-HanPhotoRag.quad K7-2880-HanWilliamTurner.quad
> > K7-2880-BradfordBCoolMatte.quad K7-2880-IPCanvas.quad
> > K7-2880-BradfordRBrightW.quad K7-2880-IPPictRagCool.quad
> > K7-2880-BradfordRBrilliantWD.quad K7-2880-IPPictRagWarm.quad
> > K7-2880-BradfordRNaturalW.quad K7-2880-IPPrintPlusM.quad
> > K7-2880-EpEnhancedMatte.quad K7-2880-IPVelvet.quad
> > K7-2880-EpMatteHW.quad K7-2880-InnovaColdPressArt.quad
> > K7-2880-HanAlbrechtDurer.quad K7-2880-InnovaPhotoFibaP.quad
> > K7-2880-HanArtProof.quad K7-2880-InnovaPhotoSmoothC.quad
> > K7-2880-HanEtching.quad K7-2880-InnovaSoftTexArt.quad
> > K7-2880-HanPhotoRag.quad K7-2880-LgnSomersetPEnhVel.quad
> > K7-2880-HanPhotoRagBrtW.quad K7-2880-MoabEntradaFABW.quad
> > K7-2880-HanPhotoRagSatin.quad K7-2880-MoabEntradaFANat.quad
> > K7-2880-HanWhiteVelvet.quad K7-2880-MoabKayentaPhotoM.quad
> >
> > **** USB connections ****
> > -rwxr-xr-x 1 root wheel 66104 Aug 20 2006
> > /usr/libexec/cups/backend/usb
> > direct usb "Unknown" "USB Printer (usb)"
> >
> > **** CUPS Info ****
> > I [19/Jun/2007:08:17:56 +0800] Setting Quad2200_K7
> > printer-is-accepting-jobs to 1 (was 0.)
> > I [19/Jun/2007:08:17:56 +0800] Setting Quad2200_K7 printer-state to 3 (was
> > 5.)
> > I [19/Jun/2007:08:17:56 +0800] Saving printers.conf...
> > I [19/Jun/2007:08:17:56 +0800] New printer 'Quad2200_K7' added by ''.
> > E [19/Jun/2007:08:38:51 +0800] get_printer_attrs: resource name
> > '/printers/ ' no good!
> > E [19/Jun/2007:08:38:51 +0800] get_printer_attrs: resource name
> > '/printers/ ' no good!
> > I [19/Jun/2007:08:39:25 +0800] Printer 'Quad2200_K7' deleted by ''.
> > I [19/Jun/2007:08:39:25 +0800] Saving printers.conf...
> > E [19/Jun/2007:08:39:25 +0800] get_printer_attrs: resource name
> > '/printers/Quad2200_K7' no good!
> > I [19/Jun/2007:08:39:46 +0800] Saving printers.conf.. .
> > I [19/Jun/2007:08:39:46 +0800] New printer 'Quad2200-K7' added by ''.
> > I [19/Jun/2007:08:39:46 +0800] Setting Quad2200-K7 device-uri to
> > "lpd://192.168.1.6" (was "file:/dev/null".)
> > I [19/Jun/2007:08:39:46 +0800] Saving printers.conf...
> > I [19/Jun/2007:08:39:46 +0800] Printer 'Quad2200-K7' modified by ''.
> > I [19/Jun/2007:08:39:46 +0800] Saving printers.conf...
> > I [19/Jun/2007:08:39:46 +0800] Printer 'Quad2200-K7' modified by ''.
> > I [19/Jun/2007:08:39:46 +0800] Setting Quad2200-K7
> > printer-is-accepting-jobs to 1 (was 0.)
> > I [19/Jun/2007:08:39:46 +0800] Setting Quad2200-K7 printer-state to 3 (was
> > 5.)
> > I [19/Jun/2007:08:39:46 +0800] Saving printers.conf.. .
> > I [19/Jun/2007:08:39:46 +0800] Printer 'Quad2200-K7' modified by ''.
> > I [19/Jun/2007:08:39:47 +0800] Saving printers.conf...
> > I [19/Jun/2007:08:39:47 +0800] Printer 'Quad2200-K7' modified by ''.
> > I [19/Jun/2007:08:41:36 +0800] Saving printers.conf...
> > I [19/Jun/2007:08:41:36 +0800] Printer 'Quad2200-K7' modified by ''.
> > I [19/Jun/2007:08:41:36 +0800] Saving printers.conf...
> > I [19/Jun/2007:08:41:36 +0800] Printer 'Quad2200-K7' modified by ''.
> > E [19/Jun/2007:08:42:18 +0800] get_printer_attrs: resource name
> > '/printers/ ' no good!
> > E [19/Jun/2007:08:42:18 +0800] get_printer_attrs: resource name
> > '/printers/ ' no good!
> > I [19/Jun/2007:08:42:51 +0800] Adding start banner page "none" to job 14.
> > I [19/Jun/2007:08:42:51 +0800] Adding end banner page "none" to job 14.
> > I [19/Jun/2007:08:42:51 +0800] Job 14 queued on 'Quad2200-K7' by
> > 'dupreezjohan'.
> > I [19/Jun/2007:08:42:51 +0800] Started filter
> > /usr/libexec/cups/filter/cgpdftoraster (PID 1513) for job 14.
> > I [19/Jun/2007:08:42:51 +0800] Started filter
> > /usr/libexec/cups/filter/quadtoneprint (PID 1514) for job 14.
> > I [19/Jun/2007:08:42:51 +0800] Started backend
> > /usr/libexec/cups/backend/lpd (PID 1515) for job 14.
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : QuadToneRIP: using curve
> > K7-2880-EpEnhancedMatte
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : QTR using curve file
> > K7-2880-EpEnhancedMatte
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : HWResolution = [ 720 720 ]
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : ImagingBoundingBox = [ 9 9 577
> > 824 ]
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : Margins = [ 0 0 ]
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : PageSize = [ 595 842 ]
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : cupsWidth = 5770
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : cupsHeight = 8240
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : stp_get_resolution(v)
> > |1440super|
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : stp_get_dither_algorithm(v)
> > |Ordered|
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : GIMP-PRINT w=595 l=9 r=586
> > h=842 t=833 b=9
> > N [19/Jun/2007:08:42:51 +0800] [Job 14] : GIMP-PRINT w=5770 l=90 r=90
> > h=8240 t=90 b=90
> > W [19/Jun/2007:08:43:11 +0800] [Job 14] recoverable: Network host '
> > 192.168.1.6' is busy, down, or unreachable; will retry in 30 seconds...
> > I [19/Jun/2007:08:43:19 +0800] Job 14 was held by 'dupreezjohan'.
> > E [19/Jun/2007:08:43:19 +0800] PID 1515 stopped with status 1!
> > I [19/Jun/2007:08:43:19 +0800] Hint: Try setting the LogLevel to "debug"
> > to find out more.
> >
> > ********************************************************************
> >
> > **** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****
> >
> > ********************************************************************
> >
> > logout
> > [Process completed]
> >
> > Much appreciated
> > Johan
> >
> >
> >
> > On 6/19/07, Roy Harrington <roy@... > wrote:
> > >
> > > Run the DiagnosticScript in the download. It'll popup a large text
> > > page. Copy and
> > > paste all the text and email it to me. I'll see if I can see what's
> > > happening.
> > >
> > > Roy
> > >
> > > On 6/18/07, Johan du Preez <dupreez.johan@...<dupreez.johan%40gmail.com>>
> > > wrote:
> > > > Morning all (at least in Hong Kong!)
> > > >
> > > > I do indeed run OSX Tiger and I did set up as per the instructions in
> > > the
> > > > tutorial. Any thoughts?
> > > >
> > > > Johan
> > > >
> > > >
> > > > On 6/19/07, Roy Harrington <roy@... <roy%40harrington.com>>
> > > wrote:
> > > > >
> > > > > On 6/16/07, dupreez_j <dupreez.johan@...<dupreez.johan%40gmail.com>
> > > <dupreez.johan% 40gmail.com>>
> > >
> > > > > wrote:
> > > > > > Hello, I am new to the QuadToneRip which I am running on my OS X
> > > with
> > > > > > PSCS3. My Epson 2200 is connected to my intranet using an Airport
> > > > > > Express base station.
> > > > > >
> > > > > > Note that I can print to the printer using the regular Epson
> > > driver
> > > > > > without any problems. However, when I try and print using the
> > > > > > Quad2200 driver i get the following message: "Network host
> > > XXX.XXX.X.X
> > > > > > is busy, down or unreachable: will retry in 30 seconds"
> > > > > >
> > > > > > Does anyone know how to solve this problem?
> > > > > >
> > > > > > Possible related issues, for which I do not have an answer:
> > > > > > 1. I did pay the required $50 for the RIP, so I am really miffed
> > > it
> > > > > > did not "work as advertised" - is there anyway to check that my
> > > > > > version of the software is indeed active, do I have input a code
> > > > > > somewhere to activate it? If so, where do ii find the code
> > > (purchase
> > > > > > via paypal etc)
> > > > >
> > > > > I think the Bonjour info in Tutorial.pdf should handle the network
> > > > > printer issue.
> > > > >
> > > > > They is no separate activation needed to run QTR. I received the
> > > paypal
> > > > > confirmation.
> > > > >
> > > > > >
> > > > > > 2. The print dialog has the following reminder: "Did you disable
> > > color
> > > > > > management in the print dialog?" - How am I supposed to do this in
> > > > > > PSSC3 when you I am printing using the RIP as there is no color
> > > > > > management settings listed under the print dialog associated with
> > > the
> > > > > > RIP.
> > > > >
> > > > > The QTR driver has no built in color management -- it's expected
> > > that you
> > > > > handle
> > > > > the color management in Print with Preview.
> > > > >
> > > > > Roy
> > > > >
> > > > > >
> > > > > >
> > > > > > Kind regards
> > > > > > Johan du Preez
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Yahoo! Groups Links
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Kind regards
> > > > Johan du Preez
> > > >
> > > >
> > > > [Non-text portions of this message have been removed]
> > > >
> > > >
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
> > --
> > Kind regards
> > Johan du Preez
> >
>
>
>
> --
> Kind regards
> Johan du Preez
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>