The Cyndustries List

#1 Test it to make sure it makes a clean + and - 15V

#2 Make a cable to connect it properly to the distro card

#3 Test the distro card to double check that voltages are correct

#4 Plug in your modules

#5 Make a drink based with clear rum

Do NOT "add" power in "parallel" with the other power supply. Power supplies aren't passive lead-acid batteries.


--- In The_Cyndustries_List@yahoogroups.com, "legionhwp" <legionhwp@...> wrote:
>
> I've maxed out my large Cyndustries PS and have a 2nd +/- Motm PS I've wired into my empty six pak. Whenever I've used any other synth (serge, fenix, etc I always used the green ground out on the Cyn PS. What do I need to do to intergrate the new MOTM ps with my existing Cyn/Modcan system?
> 
> I have combo/distro cards in all my Sixpaks so I could wire them in series if needed to. 
> 
> Any suggestions appreciated.
> 
> D_
>