The Cyndustries List

Shouldn't there be something about connecting the grounds on the old  
and the new supply in this list?


On Jun 10, 2009, at 7:25 AM, stevemodularland wrote:
> #1 Test it to make sure it makes a clean + and - 15V
>
> #2 Make a cable to connect it properly to the distro card
>
> #3 Test the distro card to double check that voltages are correct
>
> #4 Plug in your modules
>
> #5 Make a drink based with clear rum
>
> Do NOT "add" power in "parallel" with the other power supply. Power  
> supplies aren't passive lead-acid batteries.
>
> --- In The_Cyndustries_List@yahoogroups.com, "legionhwp"  
> <legionhwp@...> wrote:
> >
> > I've maxed out my large Cyndustries PS and have a 2nd +/- Motm PS  
> I've wired into my empty six pak. Whenever I've used any other synth  
> (serge, fenix, etc I always used the green ground out on the Cyn PS.  
> What do I need to do to intergrate the new MOTM ps with my existing  
> Cyn/Modcan system?
> >
> > I have combo/distro cards in all my Sixpaks so I could wire them  
> in series if needed to.
> >
> > Any suggestions appreciated.
> >
> > D_
> >
>
>
> 

Chris Muir
cbm@well.com	
http://www.xfade.com