Thanks carl and blewis, you had me worried there if
I had to replace the encoder, lucky it was just that nut behind the wheel. used
some tweezer things to tighten. thanks guys!
Mike
----- Original Message -----From: blewis_at_elandSent: Tuesday, February 15, 2011 11:41 PMSubject: [akaiS1000S1100Samplers] Re: loose Cursor wheel/knobHi,
I've come across the exact same problem on a X7000, a S01 and a S1000,
luckily it is an incredibly easy fix.
*Gently* pull of the knob - at the bottom of the shaft you'll see a 6 sided nut.
Just tighten it with a pair of needle nose pliers (you can take the whole thing to bits and use a spanner etc. to tighten - using needle nose pliers just means you can get at it easier)
Good Luck
Brian
--- In akaiS1000S1100Samplers@...m, "Mike Yates" wrote:
>
> Evening, only after about a couple years using my 1100, the cursor knob is really wobbly, like the more I have used it the looser it gets. how can I fix this or is it damaged forever?
>
> Mike
>