Akai S1000 / S1100 samplers

That standard card does however work with zip drives. I have converted all of my S1000 to internal SCSI zip drives and dumped the floppy. This also allows auto loading of samples when changing songs from a sequencer.

Rish

Life is like MIDI, your either IN, OUT or THRU.

On Apr 6, 2011, at 5:13 AM, Jaume Pons <jaumemod@...> wrote:

> Well! Well scrotumtightening resolution. After many headaches, the problem is to tie a millstone and thrown in the Ebro
> 
> The internal SCSI connector card of Akai IB-103 is turned around, or at least is not designed in a logical relation to the standard connection of other devices.
> 
> If we look at a standard PIN must always read from right to left and from top to bottom, in the cable is always marked with a red streak. Well, to read the connection of the sampler card to match the standard should read the same but with a view to the left, part welded to the left of elements to the right placing the card vertically, as is installed.
> 
> Solution? Take a carving knife and cut the teeth of the cable connector to turn it.
> 
> The disk to start the sampler is started (which did not previously) and is formatted.
> 
>