----- Original Message -----From: formals777Sent: Monday, February 16, 2009 3:40 PMSubject: [akaiS1000S1100Samplers] Re: s1000 Floppy issuesHi,
It is a specific model of floppy drive which was also used in pc's.
Look around message 632. There we discussed the floppy replacement.
You can probably find them on ebay. If you do a search on 'floppy' in
this forum - you will probably find other entries.
Rgds,
Frank
--- In akaiS1000S1100Samplers@yahoogroups.com, "Rish" wrote:
>
> Yes no standard floppy drive will work in the s1000
> ----- Original Message -----
> From: Andrew Halsall
> To: akaiS1000S1100Samplers@yahoogroups.com
> Sent: Saturday, February 14, 2009 1:50 PM
> Subject: Re: [akaiS1000S1100Samplers] s1000 Floppy issues
>
>
>
> Hi there
> Thanks for the info.
> Am I right in thinking that AKAI floppy drives are specific
hardware to the system then and that generic pc floppy drives will not
work? That maybe why i'm having problems
> As for the scsi card. No the s1000 I was given doesn't have
a scsi drive or hdd so weighing up the costs it is perhaps not the
best of ideas to be spending much money when I could perhaps purchase
a s2000 with 8 outs and memory for less than £100
>
> cheers anyway
> I will have to do a bit of budgeting
>
> Andy
>
> Sounds like your Floppy drive is shot, I too have
the KBS1000 but I converted the floppy drive to a ZIP 100 drive. I can
set you up with the correct items to make the change, do you have
SCSI? You will have to send your SCSI card to www.Route66studios. com
for the SCSI card update, they alos have the KBS1000 4.40 ver eproms.
>
> I
>
Message
Re: [akaiS1000S1100Samplers] Re: s1000 Floppy issues
2009-02-17 by Rish
Well....I have to say that it's not just a simple
PC drive and chances are that drive found on ebay will not work either....sorry
but the Akai uses a vary special drive. There is also site with info that
tells you how to do a replacement by changing some of the drives
settings....this too is bogus and does not work.
Rich
Attachments
- No local attachments were found for this message.