Analogue-sequencer

--- In analogue-sequencer@yahoogroups.com, "Colin f" <colin@c...> wrote:

I just can not get it to work :-((

I am setting the P3 in "Sysex receive mode", using under Mac OS9 
"Sysexloader", only one midicable to the P3 midi in attached, and as soon as I 
hit "send" a "bad block" message appears...

HELP!

Boele

> > What is the procedure to load an OS into the P3?
> >
> > Stupid question probably, but I just can't get it to work, getting all
> > the time a "bad block" message on the P3 asa I try to upload the
> > latest revision.
> 
> That can happen if you have your sysex app configured so that the 
handshake
> response from P3 to each block is soft-thru'ed back to P3.
> Try doing it with just the midi out from your PC connected to the midi in on
> P3, and no return lead.
> What app are you using ? Midiox ?
> You also need to be sure there is a delay of around 100ms between sysex
> blocks to give P3 a chance to write each flash block.
> 
> Cheers,
> Colin f
> 
> 
> 
> ________________________________________________
> Message sent using UebiMiau 2.7.2