Analogue-sequencer

I own a Doepfer Schaltwerk and MCV24 MIDI-CV/GATE Converter.  From 
personal experience, whether I drive an analogue synth directly from 
the Schaltwerk or from the MCV24 which is receiving MIDI notes from 
the Schaltwerk, it does the same job, can't notice jack in terms of 
latency.


--- In analogue-sequencer@yahoogroups.com, "Colin f" <colin@c...> 
wrote:
>
>  
> > Will you be adding CV/Gates as a future addition so you
> > can patch the P3 into modular systems via patch cords?
> 
> I can't really see me adding CV/gate internally.
> To get a reasonable number of channels, you end up with a load of 
connectors
> on the back.
> 
> There's little practical difference between a processor-based 
hardware
> sequencer with MIDI driving a MIDI to CV convertor, and a similar 
sequencer
> with native CV/Gate output. You could argue that a heavily laden 
MIDI bus
> could introduce timing errors that you might notice, which a CV 
native
> sequencer wouldn't.
> If/when I get the multiple MIDI output mod working, then 
dedicating one MIDI
> output to a CV convertor for one synth will give you a maximum 
latency of
> less than 5ms, which is to all intents and purposes instant.
> 
> I've got a MIDI to CV convertor kit in the works, which will be do 
the job
> nicely.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>