Analogue-sequencer

Rather than MIDI volume / panning, is it possible to assign other 
control changes to the knobs while the sequencer is running without 
affecting the sequence?

Would be particularly interested in sending programmable sysex 
messages.


--- In analogue-sequencer@yahoogroups.com, Paul Nagle 
<softroom@b...> wrote:
>
> Koen Buytaert wrote:
> 
> >Hello
> >
> >I am using a nova with the P3.
> >I have created six different sequences on six different channels 
(so
> >using six different tracks) and i want them to play at the same 
time.
> >I would like to controle manually the volume of the six tracks so 
that
> >i can fade in and fade out some tracks whenever i want.
> >With the nova i can't do both at the same time because there is 
only
> >one knob.
> >Can i use the P3 as a controler while he is busy with the 
sequences?
> >  
> >
> You sure can! I have a Nova too and find the P3's mixer function 
really 
> useful. Go to User Config to enable the mixer - then you'll find 
that 
> the knobs above the Part buttons can be used as a MIDI mixer and 
panner. 
> When each bank is loaded these are set to zero so you always have 
a 
> known base point. Once you pass zero they become active. The 
channels 
> are set automatically to correspond to your tracks - so the knob 
above 
> part 1 corresponds to the volume of track 1 etc. Give it a go!
> 
> All the best
> 
> Paul
> 
> ---
> Paul Nagle / Soft Room Music / Bogus Focus Records / Binar / 
Headshock / The Joint Intelligence Committee
>         www.softroom.co.uk / www.BogusFocus.com / 
www.JointIntelligenceCommittee.com
>