Analogue-sequencer

No, my JV-1080 gave an error and my virus TI simply didn't care, no
reaction...So when I cut off the outermost pins of a MIDI cable, I'll
be fine ?




--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" <colin@...>
wrote:
>
>  
> > when connecting a synth at the Sync output, I get a 'MIDI
> > communication error' on the synth. I've got board v 1.5 and would like
> > the MIDI as well as the DIN sync option. So I soldered R36, R24, R25
> > and two diodes on D2 and D3, but omitted the resistors on D4 and D5.
> > Then I soldered ALL resistors and wire bridges on the I/O board. Is
> > this correct ?
> 
> Standard MIDI interfaces shouldn't use pins 1 and 3 (the outermost
pins),
> and these are the only ones carrying DIN sync.
> Does the sync output work with a different MIDI device for MIDI clock ?
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>