Analogue-sequencer

> -hello,i 've finished today the 2ND main board P3 kit 1.6 with
> 3.006B,can i try it with my 1.4 others boards ,awaiting that i
> bootload the 1.4 chip ?i 've got always this tempo problem with
> this...work - no work (when i put my finger on the 3 pins of the pot,
> working during a few seconds,ground problem?

There are two different clock speeds that the CPU may run at.
Pre-production P3s used an 18MHz crystal, production units used 24MHz.
As long as the crystal speed matches the CPU, you can use the later chips in
the early boards, and vice versa.
Each CPU has the crystal speed it is meant to run at stored in flash. The OS
adjusts to run at either speed by checking that setting.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com