Analogue-sequencer

I'm syncing mine to Cubase with zero problems.  A couple 
of things to check, are you using MTC or MIDI clock or 
both?  I'm away from my config to
check but some devices get upset with the wrong one or 
without one.  Also, make sure that you aren't also sending
clock from the P3 into Cubase and sending it back out to 
itself again.  This forms a clock loop which makes things
all sorts of goofy.

Unfortunately, my DAW is dead and down at the moment so I 
can't look up any settings but mine
locked Cubase wonderfully.  In fact, I'm using it as a 
clock filter for my Schaltwerk which always had sync 
issues
driving from Cubase.  Using Cubase to sync the P3 and 
using the P3 clock to drive the Schaltwerk made everything
super solid.

James R. Coplin


On Tue, 20 Oct 2009 23:18:47 +0100
  sean zoega <sean@zoega.co.uk> wrote:
> I only have MIDI clock on one output going to P3...with 
>Cubase in 
> Internal Timecode and no MTC
> I have tried all possible options of
> MIDI clock follows project position
> Always send start message
> Send MIDI clock in stop mode
> 
> What are these tempo functions that you talk of
> cheers
> 
> boops.secretvibes wrote:
>>  
>>
>> Hi ,do you know well Cubase ?the tempo functions?,do you 
>>sync yet with 
>> cubase and ext devices, here my P3 is perfectly 
>>sync(slave)and all the 
>> synths,module behind the P3 just fine;even a 
>>monome;regards
>>
>> --- In analogue-sequencer@yahoogroups.com 
>> <mailto:analogue-sequencer%40yahoogroups.com>, 
>>"seanzoega" 
>> <szoega@...> wrote:
>> >
>> > Well to be honest...double speed was a guess...I 
>>halved the timebase 
>> of all the patterns and it seemed closer. There doesnt 
>>actually seem 
>> to be any timing of the P3 whatsoever as the tempo of 
>>the P3 doesnt 
>> match that of Cubase i.e. its not constanly out of time 
>>it drifts. My 
>> setup is Cubase to MOTU Midi Express XT to Sequentix. 
>>Has anybody 
>> managed to sync anything to Sequentix using MIDI clock 
>>or are we 
>> talking stand-alone only for this box (if so anyone want 
>>to buy a P3)
>> >
>> > --- In analogue-sequencer@yahoogroups.com 
>> <mailto:analogue-sequencer%40yahoogroups.com>, 
>>"boops.secretvibes" 
>> <boops.secretvibes@> wrote:
>> > >
>> > > i feel ,your sync configuration is not well done...
>> > >
>> > >
>> > > --- In analogue-sequencer@yahoogroups.com 
>> <mailto:analogue-sequencer%40yahoogroups.com>, 
>>"Ditton33" <ditton33@> 
>> wrote:
>> > > >
>> > > > Interesting.
>> > > >
>> > > > I just assumed it was me and was too embarrassed 
>>to ask.
>> > > >
>> > > > I don't see anything as definitive as the double 
>>speed.
>> > > >
>> > > > What I experience is mush. Everything out of time.
>> > > >
>> > > > I blamed the GenoQs but now it's gone it's still 
>>the same.
>> > > >
>> > > > I'm pretty sure it's not the P3 but it is 
>>frustrating because 
>> all I'm doing
>> > > > is feeding a cubase clock through a midisport 2x2 
>>to the P3 but 
>> it's just
>> > > > not happening.
>> > > >
>> > > >
>> > > >
>> > > > > >-----Original Message-----
>> > > > > >From: analogue-sequencer@yahoogroups.com 
>> <mailto:analogue-sequencer%40yahoogroups.com>
>> > > > > >[mailto:analogue-sequencer@yahoogroups.com 
>> <mailto:analogue-sequencer%40yahoogroups.com>] On Behalf 
>>Of seanzoega
>> > > > > >Sent: 20 October 2009 22:37
>> > > > > >To: analogue-sequencer@yahoogroups.com 
>> <mailto:analogue-sequencer%40yahoogroups.com>
>> > > > > >Subject: [analogue-sequencer] syncing with 
>>cubase
>> > > > > >
>> > > > > >has anybody manages to succesfully sync a P3 to 
>>Cubase. I'm
>> > > > > >not doing too well, first of all P3 plays at 
>>double speed
>> > > > > >when under ext. MIDI clock but even then the 
>>tempo isnt
>> > > > > >correct. Any help gratefully appreciated
>> > > > > >
>> > > > > >
>> > > > > >
>> > > > > >------------------------------------
>> > > > > >
>> > > > > >Yahoo! Groups Links
>> > > > > >
>> > > > > >
>> > > > > >
>> > > >
>> > >
>> >
>>
>>