Analogue-sequencer

> the display is a PLED. Basically all the pixels seem to be working but
> there is a variation in
> their brightness. For example, some letters have there bottom half
> duller than the top. At
> first i though this might be dead pixels. But when i go through the
> menus it is different pixels that are dull.

Odd. Haven't seen that sort of behaviour before.
You could try adjusting the brightness control to see if it can even things
out.

> Also i'm in the UK. it's a Uk adapter that i need.

You can get a suitable adapter in Maplin, but I've had some quality issues
with the connectors on those. Rapid Electronics do a better, cheaper
adapter, but they would charge you postage on an order less than 30 quid
IIRC. Any 9v DC or AC adapter with at least 400mA rating and a 2.5mm barrel
connector should do - you may find suitable universal adapters in
supermarkets and DIY shops.

> Does the Ndub option affect recording in play mode aswell. I tried
recording in this mode
> aswell but again it wasn't picking up the note ons.

Yes, it also applies to play mode record - you'll find the option on the
second page there too.

Cheers,
Colin f



________________________________________________
Message sent using UebiMiau 2.7.2