Analogue-sequencer

I have two problems.
While i was playing my P3 went crazy. All the leds began to light up
at different times. On the screen i got Kn and other stuff and it
chances all the time. After restarting it sometimes worked but for a
little time and sometimes the leds and screen went again crazy.
Even changing menu's would put the P3 sometimes in dissordre (leds and
screen). What's wrong and what can i do?
Because i didn't backup i would like to try to save my patterns the
time the P3 works ok but i don't know how.
I use logic and sounddiver.

> While i was playing my P3 went crazy. All the leds began to light up
> at different times. On the screen i got Kn and other stuff and it
> chances all the time. After restarting it sometimes worked but for a
> little time and sometimes the leds and screen went again crazy.
> Even changing menu's would put the P3 sometimes in dissordre (leds and
> screen). What's wrong and what can i do?
> Because i didn't backup i would like to try to save my patterns the
> time the P3 works ok but i don't know how.
> I use logic and sounddiver.

Is your P3 always slaved to Logic ?
Which firmware version are you using ?

It could be the same problem Henry had, although the symptoms are different.
Or it could be a hardware problem.
Firmware update would be the best way to proceed.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com

Koen,
you might need the latest v3.1.006 beta 34, there was a version that  
could go crazy with logic starting & stopping few times. it was  
discussed here (search archive) and has stopped with latest beta for me.

your sequences are not touched by the beta update usually, read the  
manual how to dump midi sysex, set a low tempo like 60BPM in logic  
and record the sysex dump to a midi track (no midi filters in logic  
activated though, read manual if you don't know how to check that).

cheers,
henry


Am 12.01.2006 um 11:43 schrieb Koen Buytaert:

> I have two problems.
> While i was playing my P3 went crazy. All the leds began to light up
> at different times. On the screen i got Kn and other stuff and it
> chances all the time. After restarting it sometimes worked but for a
> little time and sometimes the leds and screen went again crazy.
> Even changing menu's would put the P3 sometimes in dissordre (leds and
> screen). What's wrong and what can i do?
> Because i didn't backup i would like to try to save my patterns the
> time the P3 works ok but i don't know how.
> I use logic and sounddiver.
>
>
>
>
>
> SPONSORED LINKS
> Sampler	Electronic instrument	Synthesizer
> Synthesizer music	Electronic music	Midi sequencer
>
> YAHOO! GROUPS LINKS
>
>  Visit your group "analogue-sequencer" on the web.
>
>  To unsubscribe from this group, send an email to:
>  analogue-sequencer-unsubscribe@yahoogroups.com
>
>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>

------------------------------------------------------------------------ 
-----------
Who is general failure? And what is he doing on my harddisc?




[Non-text portions of this message have been removed]

--- In analogue-sequencer@yahoogroups.com, "Colin f" <colin@c...> wrote:
>
>  
> > While i was playing my P3 went crazy. All the leds began to light up
> > at different times. On the screen i got Kn and other stuff and it
> > chances all the time. After restarting it sometimes worked but for a
> > little time and sometimes the leds and screen went again crazy.
> > Even changing menu's would put the P3 sometimes in dissordre (leds and
> > screen). What's wrong and what can i do?
> > Because i didn't backup i would like to try to save my patterns the
> > time the P3 works ok but i don't know how.
> > I use logic and sounddiver.
> 
> Is your P3 always slaved to Logic ?
> Which firmware version are you using ?
> 
> It could be the same problem Henry had, although the symptoms are
different.
> Or it could be a hardware problem.
> Firmware update would be the best way to proceed.
> 
> Best regards,
> Colin Fraser
> Sequentix Music Systems Ltd
> http://www.sequentix.com
>
The problem occured when the P3 was only connected with my Nova and
only P3 midi out, Nova midi in.