Analogue systems

Correct, the adapter cables just reconnect the right pins and sockets.

 I'm using an ASys adapter cable to run a Doepfer module from an Asys socket right now. The cable was described as the reverse. Be sure to double check nothing is connected upside down.


>
> I believe you can use the same adapters, as they just establish connections
> for the circuits.  There is no directionality inherent in them, since they
> are simply wires routed between the right things.
> 
> On Wed, Apr 8, 2009 at 3:32 AM, papazionlyone <papazionlyone@...>wrote:
> 
> >   Hi again
> >
> > I forgot to say that my RS cases are old ones, PSU board only proposes ASys
> > connectors.
> >
> > No other solution than replace or add a PSU board ?
> >
> > Thanks
> > Constantin
> >
> >
> > --- In analogue_systems@yahoogroups.com<analogue_systems%40yahoogroups.com>,
> > "papazionlyone" <papazionlyone@> wrote:
> > >
> > > Hi everybody
> > >
> > > I'd like to install a few Doepfer modules in a AS case, using AS PSU.
> > >
> > > The only power adaptater I found is to install AS modules in Doepfer
> > cases : http://www.analoguesystems.co.uk/index2.htm.
> > >
> > > Can someone let me know if it works in reverse please ? (I think the
> > answer is "no")
> > >
> > > If it doesn't, where can I find adapter cables to install Doepfer modules
> > in AS cases (in Europe preferably) ?
> > >
> > > Many thanks for your replys.
> > >
> > > Cheers,
> > > Constantin
> > >
> >
> >  
> >
> 
> 
> [Non-text portions of this message have been removed]
>