Analogue systems

Hi guys
Thanks for your replys.
Cheers,
Constantin 

--- In analogue_systems@yahoogroups.com, "nicholas_kent" <nicholas_kent@...> wrote:
>
> Correct, the adapter cables just reconnect the right pins and sockets.
> 
>  I'm using an ASys adapter cable to run a Doepfer module from an Asys socket right now. The cable was described as the reverse. Be sure to double check nothing is connected upside down.
> 
> 
> >
> > I believe you can use the same adapters, as they just establish connections
> > for the circuits.  There is no directionality inherent in them, since they
> > are simply wires routed between the right things.
> > 
> > On Wed, Apr 8, 2009 at 3:32 AM, papazionlyone <papazionlyone@>wrote:
> > 
> > >   Hi again
> > >
> > > I forgot to say that my RS cases are old ones, PSU board only proposes ASys
> > > connectors.
> > >
> > > No other solution than replace or add a PSU board ?
> > >
> > > Thanks
> > > Constantin
> > >
> > >
> > > --- In analogue_systems@yahoogroups.com<analogue_systems%40yahoogroups.com>,
> > > "papazionlyone" <papazionlyone@> wrote:
> > > >
> > > > Hi everybody
> > > >
> > > > I'd like to install a few Doepfer modules in a AS case, using AS PSU.
> > > >
> > > > The only power adaptater I found is to install AS modules in Doepfer
> > > cases : http://www.analoguesystems.co.uk/index2.htm.
> > > >
> > > > Can someone let me know if it works in reverse please ? (I think the
> > > answer is "no")
> > > >
> > > > If it doesn't, where can I find adapter cables to install Doepfer modules
> > > in AS cases (in Europe preferably) ?
> > > >
> > > > Many thanks for your replys.
> > > >
> > > > Cheers,
> > > > Constantin
> > > >
> > >
> > >  
> > >
> > 
> > 
> > [Non-text portions of this message have been removed]
> >
>