Bc2000 (for the BCF2000 & BCR2000)

KI am using MIDI. Since I am stuck with the LOAD message, it is the 
only thing I can do.

The software push seems to work. I see the display on the BCR2000 
count slowly from 1 to 17. I have all the MIDI-OX parameters set 
correctly (I've even tried super slow settings to ensure no issues 
there.)

After MIDI-OX is complete, the display continues to read 17. I 
assumed, at this point, that a reboot is required.

So when I do reboot, it comes up with the LOAD message again.

I wonder if the bootstrap loader is screwy...

Any help here Karl would be welcome :-) (I ended up buying another 
new BCR2000 in the meantime.)

Mike Hunter
http://www.ombient.com




--- In bc2000@yahoogroups.com, "Karl Lurman" <karl.lurman@...> wrote:
>
> Hmmm are you uploading the os/firmware via midi or USB?
> 
> Karl
> 
> On Thu, Apr 17, 2008 at 4:16 AM, thainmlh <mike.hunter@...> wrote:
> >
> >
> >
> >
> >
> >
> > Hi all,
> >
> >  I'm getting the "LOAD" message when I power up my BCR2000 
(without
> >  holding down the two keys.)
> >
> >  Using MIDI-OX, I seem to be able to push the software up... I 
see the
> >  display count from 2 to 17.
> >
> >  Once it reaches 17 and MIDI-OX finished the load, the BCR2000 
just
> >  sits there.
> >
> >  So, I re-cycle the power...I get the load message again... :-(
> >
> >  Anyone know what is supposed to happen after the load is 
complete?
> >  Does it just sit there until you recycle the power?
> >
> >  The Behringer tech was nice, but he has never seen this situation
> >  before.
> >
> >  Does anyone have any ideas here? Does reloading the software also
> >  reload the bootstrap loader for this thing?
> >
> >  any insight would be great.
> >
> >  Mike H
> >  http://www.ombient.com
> >
> >
>