Bc2000 (for the BCF2000 & BCR2000)

Royce,
Here is the .tx I edited based on the screen dump.

.tx $F0 $0F $05 $00 $00 $00 $00 $01 $00 $02 $00 13 $00 1 $00 $00
val4.7 val0.3 $F7

Contact established we have contact!

Now, I can't be playing a note while I adjust the control or it will
error out. I get the "Midi sys-ex receive error press any key to
continue."
No wait, I take that back, I can't be playing multiple notes.
Hmm... trying to isolate when it errors out.
When I hold a note, it will let me tweak the knob!!!!
Yeah.  But sometimes it still errors out.
Weird...
Progress!
Now - advice on how to add more?
You have seen my sysex, where should I go next in terms of funkyness
to deal with?

Thanks bunch,
Cheers!
Kip
--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> Royce,
> I found another manual online, version 1.3, I have version 1.2 of the
> manual.
> The filter output page for filter #1 cutoff is 13.
> In the newer manual.
> So... If I have the sysex coming from the vfx see the screen shot, how
> do I put it into the .tx message and is it the same .tx message that
> you sent me.  I don't know how to handle the val12.13 ... what is that?
> I have not given up yet.
> Something must come thru with this...
> Can you send me another .tx string based on the sysex from the vfx?
> Thanks,
> Kip
> 
> --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> >
> > Royce,
> > 
> > I do have vfx sending sysex....
> > 
> > See new screen shot in file section, this was tweaking the filter
> > cutoff #1.
> > I did not compare it to what you have sent me yet, my son needs
> > attention, so this is just a quick email.
> > Kip
> > 
> > 
> > 
> > --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> > >
> > > Hey...
> > > I have the vanilla VFX no sd or sdII.
> > > I have the midi base chans set to 1 no 0 option.
> > > Alright, Royce, I will play around with midiquest to see if i
can get
> > > ANY realtime control over a patch edit.  
> > > If I do, then I will come back with more.
> > > I am feeling very pessimistic at this point.  
> > > I remember how often I got a crash out of midiquest and the vfx
in the
> > > past.
> > > I will try some more, sigh!
> > > 
> > > Thanks for your time.
> > > Maybe it's time for this thing to get the boot! 
> > > The vfx that is...
> > > 
> > > Kip 
> > > 
> > > --- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@> wrote:
> > > >
> > > > 
> > > > > First .tx string no result, will reinitialize after a little
> > while of
> > > > > turning the knob.
> > > > 
> > > > dash it all !
> > > > 
> > > > > Second .tx string causes sysex err and keyboard reinitialize
> > > > immediately.
> > > > So we are both wrong
> > > > 
> > > > > Judging by the midiquest dump i posted in the sysex section,
from
> > > > > midiquest, filter cutoff #1 has a 13 where yours has a twelve.
> > > > 
> > > > I noticed that too but
> > > > pp 12 -
> > > > Page 12 Filter #1
> > > > Page 13 Filter #2
> > > > Both the Page and Slot start at 0 so there isn't that sort of
> problem.
> > > > I have had to make quite a few "adjustments" to MidiQuest over the
> > years
> > > > to get it to work.
> > > > 
> > > > Have you checked  that the VFX  is set to channel 1 (or 0 if
> they work
> > > > that way) for the global Midi channel or Sysex Global channel or
> > > > whatever it is called?
> > > > 
> > > > > I tired to do this with the second .tx string. Which btw
> matches the
> > > > > dump from midiquest, however, crash.
> > > > 
> > > > >
> > > > > Hmmmm... my sysex knowledge is not so good, yet.
> > > > We all seem to be learning.
> > > > 
> > > > Can you get the VFX to output parameter sysex?
> > > > 
> > > > I see that there is a VFX - SD and a VFX-SD II in MidiQuest. What
> > model
> > > > is yours?
> > > > 
> > > > Can you get your Editor to work on any parameter on the VFX?
> > > > (what is it and what is the sysex string in MidiOx?)
> > > > If you can, try to modify the .tx line and see if you can
> control the
> > > > VFX from the BCR.
> > > > 
> > > > Royce
> > > >
> > >
> >
>