Bc2000 (for the BCF2000 & BCR2000)

Ok,
Progress!
I have 8 controls mapped, filter1 cutoff and filter2 cutoff, lfo
depth, rate, delay, noise src, pitch lfo mod.

How do I do buttons?
like filter#1 type with two options?
Filter#2 type with 0-3 4 options?
lfo waveshape with 0-6 or 7 options, a button that will incriment?

etc...

Thanks, 
Kip



--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> Royce,
> Here is the .tx I edited based on the screen dump.
> 
> .tx $F0 $0F $05 $00 $00 $00 $00 $01 $00 $02 $00 13 $00 1 $00 $00
> val4.7 val0.3 $F7
> 
> Contact established we have contact!
> 
> Now, I can't be playing a note while I adjust the control or it will
> error out. I get the "Midi sys-ex receive error press any key to
> continue."
> No wait, I take that back, I can't be playing multiple notes.
> Hmm... trying to isolate when it errors out.
> When I hold a note, it will let me tweak the knob!!!!
> Yeah.  But sometimes it still errors out.
> Weird...
> Progress!
> Now - advice on how to add more?
> You have seen my sysex, where should I go next in terms of funkyness
> to deal with?
> 
> Thanks bunch,
> Cheers!
> Kip
> --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> >
> > Royce,
> > I found another manual online, version 1.3, I have version 1.2 of the
> > manual.
> > The filter output page for filter #1 cutoff is 13.
> > In the newer manual.
> > So... If I have the sysex coming from the vfx see the screen shot, how
> > do I put it into the .tx message and is it the same .tx message that
> > you sent me.  I don't know how to handle the val12.13 ... what is
that?
> > I have not given up yet.
> > Something must come thru with this...
> > Can you send me another .tx string based on the sysex from the vfx?
> > Thanks,
> > Kip
> > 
> > --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> > >
> > > Royce,
> > > 
> > > I do have vfx sending sysex....
> > > 
> > > See new screen shot in file section, this was tweaking the filter
> > > cutoff #1.
> > > I did not compare it to what you have sent me yet, my son needs
> > > attention, so this is just a quick email.
> > > Kip
> > > 
> > > 
> > > 
> > > --- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@> wrote:
> > > >
> > > > Hey...
> > > > I have the vanilla VFX no sd or sdII.
> > > > I have the midi base chans set to 1 no 0 option.
> > > > Alright, Royce, I will play around with midiquest to see if i
> can get
> > > > ANY realtime control over a patch edit.  
> > > > If I do, then I will come back with more.
> > > > I am feeling very pessimistic at this point.  
> > > > I remember how often I got a crash out of midiquest and the vfx
> in the
> > > > past.
> > > > I will try some more, sigh!
> > > > 
> > > > Thanks for your time.
> > > > Maybe it's time for this thing to get the boot! 
> > > > The vfx that is...
> > > > 
> > > > Kip 
> > > > 
> > > > --- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@> wrote:
> > > > >
> > > > > 
> > > > > > First .tx string no result, will reinitialize after a little
> > > while of
> > > > > > turning the knob.
> > > > > 
> > > > > dash it all !
> > > > > 
> > > > > > Second .tx string causes sysex err and keyboard reinitialize
> > > > > immediately.
> > > > > So we are both wrong
> > > > > 
> > > > > > Judging by the midiquest dump i posted in the sysex section,
> from
> > > > > > midiquest, filter cutoff #1 has a 13 where yours has a twelve.
> > > > > 
> > > > > I noticed that too but
> > > > > pp 12 -
> > > > > Page 12 Filter #1
> > > > > Page 13 Filter #2
> > > > > Both the Page and Slot start at 0 so there isn't that sort of
> > problem.
> > > > > I have had to make quite a few "adjustments" to MidiQuest
over the
> > > years
> > > > > to get it to work.
> > > > > 
> > > > > Have you checked  that the VFX  is set to channel 1 (or 0 if
> > they work
> > > > > that way) for the global Midi channel or Sysex Global channel or
> > > > > whatever it is called?
> > > > > 
> > > > > > I tired to do this with the second .tx string. Which btw
> > matches the
> > > > > > dump from midiquest, however, crash.
> > > > > 
> > > > > >
> > > > > > Hmmmm... my sysex knowledge is not so good, yet.
> > > > > We all seem to be learning.
> > > > > 
> > > > > Can you get the VFX to output parameter sysex?
> > > > > 
> > > > > I see that there is a VFX - SD and a VFX-SD II in MidiQuest.
What
> > > model
> > > > > is yours?
> > > > > 
> > > > > Can you get your Editor to work on any parameter on the VFX?
> > > > > (what is it and what is the sysex string in MidiOx?)
> > > > > If you can, try to modify the .tx line and see if you can
> > control the
> > > > > VFX from the BCR.
> > > > > 
> > > > > Royce
> > > > >
> > > >
> > >
> >
>