Bc2000 (for the BCF2000 & BCR2000)

I don't know off-hand the sysex you'd send to the BCR to change the
midi channel it transmits on, but you can set up a loopback via midiox
and thus the BCR can retransmit to itself. Some midi patchbays allow
for this as well. You have to be careful how you set it up to avoid
MIDI loops, but I've gotten it to work quite well. In my case, I store
"presets" for synth models I'm programming on a K2000RS. When I hit a
button to recall a preset, the sysex data is sent simultaneously to
the K2000RS and the BCR, causing the LEDs on the BCR indicating knob
position/button state to update as well. I'm pretty sure you could set
up something similar so that when you turn a knob, the transmit
channel also changes.

    -Andrew-

> > Each BCR knob is assigned to a specific MIDI Channel. Useful but my
> Blofeld is 16 part 
> > multitimbral. Is there a way to assign MIDI channel to one knob?
> This way I will twist the 
> > knob change the midi channel for all other knobs. So in short is it
> possible to control the 
> > midi channel of all knobs from 1 knob ?