Bc2000 (for the BCF2000 & BCR2000)

Problems still, sending the vfx_all.syx file results in error 22 on bcr.
I will post it.


--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> Ah, nice ... dos commands. I never actually did "that" with any copy
> command. I thought I was going to have to cut and paste.  
> Which is what I was trying to do with codeblocks on the .bc2 files.
> 
> Ok, that will put them all in order, or do I need to have each one end
> with $end?
> 
> I will experiment today, and then try to upload to vfx when I get home.
> BTW the .txinterval setting of 100 seems to work well. I can then
> change the .resolution to higher values. I still hangs when I try to
> do multinotes and multi knob twisting, however, it is much better, I
> can actually twist alot real time, even envelops without seize, as
> long as I am only messing with one knob and one note.
> 
> Thanks again, Kip
> 
> 
> 
> --- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@> wrote:
> >
> > Hi Kip
> > 
> > > > Or you could load the 6 files into my editor and save each of them
> > as
> > > > a sysex file and join the sysex files together and send them with
> > > MidiOx
> > > .
> > > Ok ... how do I join them?
> > > Just paste them together in your editor and save as a sysex,
then dump
> > > using midiox.
> > > Ok, will try that..
> > >
> > 
> > Start/run cmd
> > copy /B vfx1.syx+vfx2.syx+vfx3.syx+vfx4.syx+vfx5.syx+vfx6.syx
vfxAll.syx
> > or
> > copy /B vfx?.syx vfxall.syx
> >
>