Bc2000 (for the BCF2000 & BCR2000)

Hi Alessandro

> I'd command panning with the bcf but I probably lost a step in the
> various explanations.
> the 01v96 pan  data string is:
> left side $F0 $43 $10 $3E $7F $01 $1B $00 $00 $7F $7F $7F $41 $F7
> center    $F0 $43 $10 $3E $7F $01 $1B $00 $00 $00 $00 $00 $00 $F7
> right side$F0 $43 $10 $3E $7F $01 $1B $00 $00 $00 $00 $00 $3F $F7

$F0 $43 $10 $3E $7F $01 $1B $00 $00 $7F $7F $7F $41 $F7
$F0 $43 $10 $3E $7F $01 $1B $00 $00 $00 $00 $00 $00 $F7
$F0 $43 $10 $3E $7F $01 $1B $00 $00 $00 $00 $00 $3F $F7
Header ---------------------------- Data ----------
------------------------------------------------or checksum? (but it
couldn't be as the second and third lines are the same except fot the
checksum? byte)

Are you sure this is correct?
It looks very weird for a pan control.
How is it defined in the sysex specification? 



>  then
> $encoder 1
>   .showvalue on
>   .mode 12dot
>   .resolution 96 96 96 96
>   .default 0
>   .minmax 0 127

   .minmax  $41 0 ; for full left


Royce



>   .tx $F0 $43 $10 $3E $7F $01 $1B $00 $00 $7F $7F $7F val $F7
>  and the pan work just half portion of course.

> i
> I've tray to change the variable but nothing.
> where i mistake
> i hope someone can explain 
> all the best
> Alessandro
>