Bc2000 (for the BCF2000 & BCR2000)

Hi
> Sorry to flood the messageboard...
Not a problem

> I am hoping to be able to switch presets on one of my Behringers 
> romotely when I switch presets on the other in order to have them 
> operate like a single device. Is this possible? Can the BC's respond 
> to a remote preset change command?

This is a Master and slave relationship. 
You will change the preset only on the Master or you will be out of sync.
You will need to setup the Presets on the Master and the Global
channel on the slave.

(on the Master)
You need to add an extra line in the Preset LEARN message in the
Master BC (as you did before) - Preset change which is Midi message
$C0 + channel

eg for preset 10 and using channel 15 as the channel only being being
used to sync the BCs.
$CE 9

Don't forget Channel starts at 0 and Presets start at 0 so Preset 10
is sent as 9

You will need to add the Midi Preset message to the LEARN message for
each of the 32 BC presets to keep in sync.  A bit tedious I'm afraid,
but it does allow for great flexibility in what you can select. 

(on the slave)
You will need to set the global Midi Receive Channel on the slave BC .

BC Manager - "B-Controls Dialog" The menu button that looks like a
globe for the Global settings - Receive Channel - would be set to 15,
in this example, on the slave unit.

Royce