Bc2000 (for the BCF2000 & BCR2000)

Royce,

Thanks for your prompt reply ... will grab the editor and see if I can
work it out. 

Bien

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi Bien
> 
> > I did search the archives ... and found a few posts regarding
> > increment functions on the BCR2000. However, it looks like a lot of
> > this groups interest - programming sysex - is way over my head!
> > 
> > Using the 0.2beta3 editor I have tried various ways of programming the
> > buttons to function incrementally.
> 
> This is your problem. 
> The Java editor just doesn't cover all the things the BCs can do. You
> also can't program all the things that the BC's can do from the unit
> itself.
> Grab Mark's editor from the files section. 
> It is for the Windows PC, but you should be able to get it going under
> the Mac OS with a Windows emulator.
> 
> > On another controller I have if I want to step through 5 things I set
> > the Max to 4 and the Min to 0 and the Step to 1. Presto!
> 
> For you above example....
> Follow Mark's instructions to set it up and it should detect the Units
> connected.
> 
> Highlight the BC unit you want to program (you may only have one) and
> press the 'P' (Preset) toolbar button.
> On the next dialog that pops up press the <-> black and red dash
> button to bring up the Buttons page
> Highlight the button you are interested in and click the 'E' (edit) on
> the toolbar of the button dialog that has just popped up.
> 
> Set 'Type' to the Midi message you want either using the 'Standard
> output' or if you need sysex or multiple messages select 'Custom output'
> Fill in the values that will appear, depending what 'Type' you select.
> Lets say you select "Control Change'
> Set the Channel and Controller number
> Set 'value 1' to 0 (Min) and 'Value 2' to 4 (max) and  'Mode' to
> "Increment" and 'Increment knob' to 1
> Press OK and you are done for that button.
> Send it to the BC
> 
> Hope this helps 
> 
> Royce
>