Bc2000 (for the BCF2000 & BCR2000)

Argh.... I meant did you change the preset...
after you send it push the preset button then come back to the preset
you want to use.

--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> Did you change the channel first before trying the preset?
> I have found that if I send a preset, for the bcr to settle I have to
> switch the preset to something else then come back.
> If you are using the preset buttons you might have to cycle the power
> on the bcr.
> Try that, if you haven't already.
> Maybe post your preset so we can look at what you are doing...
> Kip
> 
> --- In bc2000@yahoogroups.com, smokeystovernyc <smokeystovernyc@>
> wrote:
> >
> > Mark,
> > 
> > Yes, I am referring to the individual channels assigned to buttons
> and encoders.  In BC Manager, I have, for example, all of the cc's in
> preset 3 set to send on channel 3.  Then, I send the preset to the
> BCR2000, and it receives the preset succuesfully.  However, when I
> check the  channel for each button and encoder by accessing the
> BCR2000 edit menu, channel 16 is assigned to each one.  I have
> verified this by monitoring the midi output with Bome's Midi
> Translator...channel 16 for everything.
> > 
> > Thanks for the reply, Mark.
> > 
> > joel  
> > 
> > -----Original Message-----
> > From: Mark van den Berg <markwinvdb@>
> > Sent: Wednesday, December 31, 2008 1:29 PM
> > To: bc2000@yahoogroups.com
> > Subject: [bc2000] Re: BC Manager midi channel issue
> > 
> > --- In bc2000@yahoogroups.com, joel stover <smokeystovernyc@> wrote:
> >  > Problem: When I transfer a preset from BC Manager, it doesn't
> >  matter what midi channel I have set, it always ends up being channel
> >  16 after transferring to the BCR. I know that I can change the
> >  channel manually with the BCR, but that kind of defeats the
purpose of
> >  BC Manager
> > 
> >  Strange.
> > 
> >  Are you talking about the MIDI channels of individual button/encoder
> >  definitions (as set on the "Standard output" tab, e.g. for CC
> messages)?
> >  And what do you mean by "it always ends up being channel 16" (and how
> >  have you tested that)?
> > 
> >  Mark.
> > 
> >  
> >  Messages in this topic  (2)  Reply  (via web post)  | Start a new
> topic 
> > Messages | Files | Photos | Links | Database | Polls | Members |
> Calendar
> > MARKETPLACE
> > From kitchen basics to easy recipes - join the Group from Kraft Foods 
> > 
> > 
> > [The entire original message is not included]
> >
>