Bc2000 (for the BCF2000 & BCR2000)

Hello, in addition to the editing knob value issue I just sent, the other main problem I'm running into is editing a preset (for a BCR) within BCMan. My BCR2000 is version 1.10, I'm running WindowsXP SP3, and the USB driver is the modified 1.2.1.3 that's in the group's file section. Here's what I'm doing:

1. Within BCMan 1.5.1 I have a Presets window open.
2. I'll then click on the 'Show Encoders' button.
3. Within the encoders edit window that comes up I'll edit an encoder.
4. Close the encoders window.
5. Back at the Presets window, with the edited preset selected, I select menu MIDI > Send.
6. On BCR, it receives the preset, but when finished the lights on every encoder and button goes off.
7. When I send the preset again, while the sysex is being sent the lights on the encoders go back on, but as soon as the sysex is finished sending, all of the lights turn off again.

I've been playing around with this a bit and I've found that if after sending the preset, if I select the preset right button on my BCR2000, then the preset left button (to switch to another preset and then back to the original), the lights on the encoders light up correctly, and with the correct values.

So what's going on? I sure hope I don't have to do this every time I edit a preset as this is a pain.

Thanks,

Jeff