Bc2000 (for the BCF2000 & BCR2000)

>Have you presed the store button to save the preset once you have loaded it?

After I send the Preset from BCMan, all lights go off (indicating to me at least that something is wrong).

Here are the results:

A) After sending the preset, I press the store button.  This results in the blank preset being saved.  For example, if after sending the preset from BCMan I press the store button (twice), then press the preset > button then press the preset < button, all lights are off

  --or--

B) After sending the preset, I press the preset > button then press the preset < button, then the encoders I programed are lit up correctly.

I think it was Kip who replied back that this (B) is normal, though this seems very wierd to me, having to manually press the buttons to finish getting the preset.

Jeff