Bc2000 (for the BCF2000 & BCR2000)

Hi kip_1999

Virtual lcd - I tried and it crashes more and more and then decided not to use , no ok

Routing - usb , do you think if I route via midi on my m-audio fast track could solve the problem ?

 I tried other preset from file section (preset "bcfmce") and it worked , because its not mackie but GM so I don't get many controls like inserts neither eq .  (Magos couldn't be downloaded I will try again) . Does magos provide control over eq ? 

But most important I took the bcf to a friends house where I tested in MCE  with cubase 4 and vista and wow it worked really nice !!! So it is something with my setup maybe asio 4all  , I will try reinstall cubase and drivers again 

Any comments are welcome

Denis
 
--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> Are you using a virtual lcd?
> How are you routing your midi from bcf?
> Have you tried the other bcf preset for Live, here in the filse
> section?  I think it is Mago's.
> I know you are not using Live, however, many, not all, of them mackie
> commands are the same across daws. It might help to eliminate some
> variables.
> Kip
> 
> 
> 
> --- In bc2000@yahoogroups.com, "nedaggg" <nedagg@> wrote:
> >
> > Hello 
> > 
> > Anybody using bcf with cubase sx3.1. ???   Any advices are welcome !!!
> > 
> > --- In bc2000@yahoogroups.com, "nedaggg" <nedagg@> wrote:
> > >
> > > Hello. When I use my bcf2000 in mackie mode on Cubase sx 3.1 
> there's lot of delay/latency . If I move a fader , it returns to
> positions and after some tweaking of knobs and mainly press function
> keys  the bcf almost do not respond anymore . Wbbhen I use in BC mode
> instead everything goes fine , faders follows automation in real time
> .I noticed that another generic remote Preset from behringer (simple
> mixer )used in bc mode caused about the same  delay  I'm using Vista ,
> firmware 1.10, Core duo , 1 Gb memory.  Any check-list suggested to
> solve this problem ? It seems to be any config issue . Thank you. Denis
> > >
> >
>