and thanks for answering!
I wanted to ask you how could I daisy chain the units as you said.
I thought a possible solution could be (for the uses I wanted to)
- put the BCF on the MIDI port in my firewire interface and control Nuendo with Mackie emulation
- Then hook BCR by USB and my midi keyboard controller through the midi on That BCR so I can do the Virtual instrument all in that way.
I would need 2 midi cables for BCF and one for the keyboard.
Would this work fine...
I don't know
Maybe I should
- USB the BCF and then Midi the BCR with that mode described on the manual.... and then the keyboard at the MIDI port at my firewire interface...
That I can do but then I don't know how to configure the MIDI ports at "device setup" at nuendo. Don't know if I have to disable the windows or direct music ports or what...
I thing that sort of things is what is troubling me the most
Anyways thanks for the suggestions
Guido
Just how
--- In bc2000@yahoogroups.com, "ivaasura" wrote:
>
> --- In bc2000@yahoogroups.com, "guidoronconi" guidoronconi@ wrote:
> >
> > I should get an eight chanel midi interface then, but then I should only
> > use the ports of that interface shouldn't I?
>
> Yes, of course. But you do not need an 8-port interface, if you have
> not so many devices. There are 4- or 5-port available, too.
>
> > Is there any you advise me to buy?
>
> I bought an used ESI M8U from eBay. But there are other good
> interfaces from MOTU, Midiman/M-Audio. I recently got an older MOTO
> 5-Port interface for 5,- Euro, that works on the printer port, but
> even with Win XP.
>
> > Thanks, In the meantime I shall use one dvice at a time
>;
> Or use a daisy chain...
>