Message
Re: vu meter
2009-01-16 by guidoronconi
the thing is I don't know what the layouts for reason are (other than knowing the knobs change in every device.)
I would like to know if you guys know for example: how to get from a device to another so I could change that without going to the mouse o qwerty keyboard...
Maybe also know other stuff about reason layouts..
Thanks very much and I'll keep trying
Guido
--- In bc2000@yahoogroups.com, "guidoronconi" wrote:
>;
> Hi
> and thanks for answering!
>
> I wanted to ask you how could I daisy chain the units as you said.
> I thought a possible solution could be (for the uses I wanted to)
>
>
> * put the BCF on the MIDI port in my firewire interface and control
> Nuendo with Mackie emulation
> * Then hook BCR by USB and my midi keyboard controller through the
> midi on That BCR so I can do the Virtual instrument all in that way.
>
>
> I would need 2 midi cables for BCF and one for the keyboard.
> Would this work fine...
> I don't know
>
> Maybe I should
>
>
> * USB the BCF and then Midi the BCR with that mode described on the
> manual.... and then the keyboard at the MIDI port at my firewire
> interface...
>
> That I can do but then I don't know how to configure the MIDI ports at
> "device setup" at nuendo. Don't know if I have to disable the windows or
> direct music ports or what...
>
> I thing that sort of things is what is troubling me the most
>
> Anyways thanks for the suggestions
> Guido
>
>
> Just how
> --- In bc2000@yahoogroups.com, "ivaasura" Sunrider7@ wrote:
> >
> > --- In bc2000@yahoogroups.com, "guidoronconi" guidoronconi@ wrote:
> > >
> > > I should get an eight chanel midi interface then, but then I should
> only
> > > use the ports of that interface shouldn't I?
> >
> > Yes, of course. But you do not need an 8-port interface, if you have
> > not so many devices. There are 4- or 5-port available, too.
> >
> > > Is there any you advise me to buy?
> >
> > I bought an used ESI M8U from eBay. But there are other good
> > interfaces from MOTU, Midiman/M-Audio. I recently got an older MOTO
> > 5-Port interface for 5,- Euro, that works on the printer port, but
> > even with Win XP.
> >
> > > Thanks, In the meantime I shall use one dvice at a time
> >
> > Or use a daisy chain...
> >
>