Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "philk22002" <philk033@...> wrote:
>
> Hello
> is it possible to send 2 variables of 4 bits with the Bcn44 ?
> 
> the message with Bcr2000 for mys Kenton Pro solo MKII
> ".tx $F0 $00 $20 $13 $03 $20 14 1 val0.3 val4.7 $F7 "
> 
> 
> and structure of the sysex message to kenton
> 
>   "The Pro-SOLO mkII can be controlled by Sysex messages in the following
> format:
> The first five bytes of sysex for the Pro-SOLO mkII are always the same
> for all data types
> [ 1] 0F0h - Sysex command
> [ 2] 00h - Company ident first byte
> [ 3] 20h - Company ident second byte
> [ 4] 13h - Company ident third byte
> [ 5] 03h - Product code – Pro-SOLO
> [ 6 ] 0dddnnnn - where ddd is the data type and nnnn is the device number
> where ddd = 010 = data change (so for device #1, this byte = 20h)
> [ 7] 0000uuuu - where uuuu = low 4 bits of parameter address
> [ 8] 0000hhhh - where hhhh = high 4 bits of parameter address
> [ 9] 0000uuuu - where uuuu = low 4 bits of data
> [ 10 ] 0000hhhh - where hhhh = high 4 bits of data
> [ 11 ] 0F7h - end of exclusive ) "
> 
> thank you
> 
> Philk
>
midi learn not work because the message is too long

Philk