Bc2000 (for the BCF2000 & BCR2000)

My setup with Protools is great, I can use the bcf 2000 flawlessley, work  
just like mackie, its my bcr 2000, it only works with some vst, I would like 
to  use a vst like arturia cs80, or albino,, I can use cubase , reasons...I 
have  about 520 plugins and effects together and would like to use my bcr 
2000 with  them
 
james
 
 
In a message dated 6/17/2009 3:11:37 P.M. Eastern Daylight Time,  
ed.thewho@... writes:

 
 


--- In _bc2000@...2_ (mailto:bc2000@yahoogroups.com) ,  
bambuotk@... wrote:
>
> Greetings, I have both bcr and bcf, I got  the bcf to work with Protools 
> L.E. 8 and the bcr somewhat, what I  mean is that some plugins wont work 
with 
> the bcr, I can get the Pro53  by NI to work but that's because its 
already 
> set for it, the presets  are already built in the bcr for it but not for 
other 
> vst, anyone  have a solution?
> 
> James
> ************ ************<WBR>**Download  the AOL Classifieds Toolbar for 
lo
> fingertips.  
> 
(_http://toolbar.http://toolbar.http://toolbar.http://toohttp://toolbar.http_ 
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004) )
>

Hi  James,

I didn't work so much with PT so i can't tell you what to do  but
i set it up for Cubase/Nuendo and i tell you how it works there, so you  
maybe can find a solution for PTLE8.

first the tool for finding out  whats happening on Midi is MidiOX and Midi 
Yoke on Windows.
If you work  with Mac try to find a Midi monitoring tool to see which Midi 
commands are  sent between Host and Controller.
Then look for a customize tool inside PT  to assign the controls or 
otherwise adjust the BCR to fit the needs of PT  plugins.
I don't know if this possible in PT cause they normally cook thier  own 
soup. But have a try.

It depends in wich mode you are using the BCR  (Native, Mackie 
Protocol,...It 

In Mackie Protocol you can also  use genmce - i think it can be found HERE 
-> _http://shoshin.http://shohttp://_ (http://shoshin.110mb.com/genmce/) 

good  luck

greetz
Martin





**************Download the AOL Classifieds Toolbar for local deals at your 
fingertips. 
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004)