Bc2000 (for the BCF2000 & BCR2000)

Greetings, I have both bcr and bcf, I got the bcf to work with Protools  
L.E. 8 and the bcr somewhat, what I mean is that some plugins wont work with 
the  bcr, I can get the Pro53 by NI to work but that's because its already 
set for  it, the presets are already built in the bcr for it but not for other 
vst,  anyone have a solution?
 
James
**************Download the AOL Classifieds Toolbar for local deals at your 
fingertips. 
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004)

--- In bc2000@yahoogroups.com, bambuotk@... wrote:
>
> Greetings, I have both bcr and bcf, I got the bcf to work with Protools  
> L.E. 8 and the bcr somewhat, what I mean is that some plugins wont work with 
> the  bcr, I can get the Pro53 by NI to work but that's because its already 
> set for  it, the presets are already built in the bcr for it but not for other 
> vst,  anyone have a solution?
>  
> James
> **************Download the AOL Classifieds Toolbar for local deals at your 
> fingertips. 
> (http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004)
>

Hi James,

I didn't work so much with PT so i can't tell you what to do but
i set it up for Cubase/Nuendo and i tell you how it works there, so you maybe can find a solution for PTLE8.

first the tool for finding out whats happening on Midi is MidiOX and Midi Yoke on Windows.
If you work with Mac try to find a Midi monitoring tool to see which Midi commands are sent between Host and Controller.
Then look for a customize tool inside PT to assign the controls or otherwise adjust the BCR to fit the needs of PT plugins.
I don't know if this possible in PT cause they normally cook thier own soup. But have a try.

It depends in wich mode you are using the BCR (Native, Mackie Protocol,....).

In Mackie Protocol you can also use genmce - i think it can be found HERE -> http://shoshin.110mb.com/genmce/

good luck

greetz
Martin

My setup with Protools is great, I can use the bcf 2000 flawlessley, work  
just like mackie, its my bcr 2000, it only works with some vst, I would like 
to  use a vst like arturia cs80, or albino,, I can use cubase , reasons...I 
have  about 520 plugins and effects together and would like to use my bcr 
2000 with  them
 
james
 
 
In a message dated 6/17/2009 3:11:37 P.M. Eastern Daylight Time,  
ed.thewho@... writes:

 
 


--- In _bc2000@...2_ (mailto:bc2000@yahoogroups.com) ,  
bambuotk@... wrote:
>
> Greetings, I have both bcr and bcf, I got  the bcf to work with Protools 
> L.E. 8 and the bcr somewhat, what I  mean is that some plugins wont work 
with 
> the bcr, I can get the Pro53  by NI to work but that's because its 
already 
> set for it, the presets  are already built in the bcr for it but not for 
other 
> vst, anyone  have a solution?
> 
> James
> ************ ************<WBR>**Download  the AOL Classifieds Toolbar for 
lo
> fingertips.  
> 
(_http://toolbar.http://toolbar.http://toolbar.http://toohttp://toolbar.http_ 
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004) )
>

Hi  James,

I didn't work so much with PT so i can't tell you what to do  but
i set it up for Cubase/Nuendo and i tell you how it works there, so you  
maybe can find a solution for PTLE8.

first the tool for finding out  whats happening on Midi is MidiOX and Midi 
Yoke on Windows.
If you work  with Mac try to find a Midi monitoring tool to see which Midi 
commands are  sent between Host and Controller.
Then look for a customize tool inside PT  to assign the controls or 
otherwise adjust the BCR to fit the needs of PT  plugins.
I don't know if this possible in PT cause they normally cook thier  own 
soup. But have a try.

It depends in wich mode you are using the BCR  (Native, Mackie 
Protocol,...It 

In Mackie Protocol you can also  use genmce - i think it can be found HERE 
-> _http://shoshin.http://shohttp://_ (http://shoshin.110mb.com/genmce/) 

good  luck

greetz
Martin





**************Download the AOL Classifieds Toolbar for local deals at your 
fingertips. 
(http://toolbar.aol.com/aolclassifieds/download.html?ncid=emlcntusdown00000004)