Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, karel skakal <s_y_nagual@...> wrote:
> I installed firmware 1.07 and everything is great, now i must read the 
> manual on how to actually use it.
> BTW I have only one BCR, no BCF, and I don't know how the confusion 
> started with BCF, it even showed me midi in/out to BCF...but the 
> firmware update fixed it all

Ah...
If you can remember, which firmware version did you have originally (as shown on the BCR's display on startup)?
If it was a version earlier than 1.07, that might be the cause of the problem: maybe that version didn't recognize the "$rev R1" statement (and thus basically had the same effect I attributed to the BCF in my previous post).
Unfortunately I have never been able to lay my hands on any pre-1.07 versions, so I can't be sure.
If you actually had an earlier version before installing 1.07, I've missed a great opportunity: it would have been possible to simply transfer the older firmware from your BCR to your computer (via MIDI). What a pity...

By the way, why have you installed 1.07 instead of 1.10? (1.10 has a few additional operational capabilities.)

Mark.