Bc2000 (for the BCF2000 & BCR2000)

Hi Mark,...after reading your letter, I went back to 1.10 which was there before I am sure...my BCR is not that old and I remember seeing it. (I confused firmwares)
With the editor, something wasn't right, (never found out what) and  re-installing fixed it,I was always on the last version, now it works...What a job you did on this thing, awesome.  I hope I can use it soon, so far i 'struggle' a bit.cheers, all best, kareland thank you for your help, I am not sure I could have figured it out so fast:)

--- On Wed, 12/5/10, markwinvdb <markwinvdb@...> wrote:

From: markwinvdb <markwinvdb@...>
Subject: [bc2000] Re: BC manager error
To: bc2000@yahoogroups.com
Date: Wednesday, 12 May, 2010, 21:47















 
 



  


    
      
      
      --- In bc2000@yahoogroups. com, karel skakal <s_y_nagual@ ...> wrote:

> I installed firmware 1.07 and everything is great, now i must read the 

> manual on how to actually use it.

> BTW I have only one BCR, no BCF, and I don't know how the confusion 

> started with BCF, it even showed me midi in/out to BCF...but the 

> firmware update fixed it all



Ah...

If you can remember, which firmware version did you have originally (as shown on the BCR's display on startup)?

If it was a version earlier than 1.07, that might be the cause of the problem: maybe that version didn't recognize the "$rev R1" statement (and thus basically had the same effect I attributed to the BCF in my previous post).

Unfortunately I have never been able to lay my hands on any pre-1.07 versions, so I can't be sure.

If you actually had an earlier version before installing 1.07, I've missed a great opportunity: it would have been possible to simply transfer the older firmware from your BCR to your computer (via MIDI). What a pity...



By the way, why have you installed 1.07 instead of 1.10? (1.10 has a few additional operational capabilities. )



Mark.